Overview
SDPTOP JA1203 Electronic Precision Balance is a High Accuracy weighing device with 120g weighing range and 1mg Readability for use in laboratory and other environments. It features an oversized backlit LCD screen and touch buttons for easy operation, with Draft Shield and overload protection to ensure stable and reliable weighing.
Features
1. Large LCD screen with backlight, High Sensitivity touch button, easy to operate;
2. Sensitivity touch button, built-in hook;
3. Overload protection pan, under the pan with airflow Draft Shield;
4. Display shield, providing additional dust and scratch protection to extend the service life of Balance;
5. With Glass Door Transport Protection Lock, 4-sided fully transparent Glass Draft Shield, one side aluminum alloy back plate;
6. Full scale range peeling, four-level shockproof, adjustable weighing speed;
7. All aluminum Balance base, prevent low frequency vibration, the fuselage is more stable;
8. Piece counting, percentage weighing, gram, ounce, carat and other unit conversions;
9. Automatic zero tracking adjustable, super overload protection, automatic fault diagnosis.
Principle
The electronic Precision Balance detects the weight of the weighing object through the High Accuracy Sensor and converts the signal into a digital display. Built-in automatic zero tracking and shock protection ensure stable readings in the presence of environmental disturbances, while reducing airflow effects with Draft Shield for accurate weighing.
Applications
Laboratories, scientific research institutions, industrial quality control, educational institutions, pharmaceutical industry
Steps
1. Place the Balance on a smooth table and connect the power supply;
2. Turn on the power switch and wait for the Balance self-test to complete;
3. Use external test weights to calibrate (if required);
4. Place the item to be weighed on the pan and read the display data;
5. Use peeling function to remove container weight (if necessary);
6. After weighing, turn off the power and clean the equipment.
Notice
• Ensure that the working Ambient Temperature is within the range of 5~ 40 ° C, and the relative humidity does not exceed 85%;
• Avoid overloading to prevent damage to the Sensor;
• Regularly clean the pan and Draft Shield to prevent dust accumulation;
• Fix Draft Shield with Glass Door Protection Lock during transportation;
• Power supply voltage only (220V/50Hz or 110V/60Hz) to avoid power mismatch;
• In case of failure, refer to the automatic diagnosis function or contact a professional for repair.
