Overview
The SDPTOP JA3003 Electronic Precision Balance is a High Accuracy weighing device with a 300g Capacity Range and 1mg Readability for laboratory and industrial environments. The Balance features an oversized backlit LCD display, high Sensitivity touch buttons and a 4-sided fully transparent Glass Draft Shield for easy operation and stable weighing.
Features
1. Large LCD screen with backlight, High Sensitivity touch button, easy to operate;
2. Sensitivity touch button, built-in hook;
3. Overload protection pan, under the pan with airflow Draft Shield;
4. Display shield, providing additional dust and scratch protection to extend the service life of Balance;
5. With Glass Door Transport Protection Lock, 4-sided fully transparent Glass Draft Shield, one side aluminum alloy back plate;
6. Full scale range peeling, four-level shockproof, adjustable weighing speed;
7. All aluminum Balance base, prevent low frequency vibration, the fuselage is more stable;
8. Piece counting, percentage weighing, gram, ounce, carat and other unit conversions;
9. Automatic zero tracking adjustable, super overload protection, automatic fault diagnosis.
Principle
Electronic Precision Balance converts the weight of the weighing object into an electrical signal through the Sensor, which is processed by the internal circuit and displayed on the LCD screen. It uses automatic zero tracking and four-stage shock protection technology to ensure weighing accuracy and Stability, while reducing airflow interference through Draft Shield.
Applications
Laboratory, industrial weighing, quality control, education and research
Steps
1. Place the Balance on a smooth table and connect the power supply;
2. Turn on the power switch and wait for the Balance self-test to complete;
3. External calibrating with test weight;
4. Place the object to be weighed on the pan and read the display results;
5. Switch units or use the peeling function as needed;
6. Turn off the power after use and clean the equipment.
Notice
• Ensure that the working Ambient Temperature is between 5 and 40 ° C, and the relative humidity does not exceed 85%;
• Avoid overloading to prevent damage to the Sensor;
• Regularly clean the Draft Shield and pan to keep the equipment clean;
• Glass door protection lock is used during transportation to prevent Glass damage;
• Power supply voltage only to avoid electrical failure.
