Overview
The SDPTOP JA5003 Electronic Precision Balance is a High Accuracy weighing instrument with a weighing range of 500g and a Readability of 1mg. It features an oversized backlit LCD screen and high-Sensitivity touch buttons for easy operation and is suitable for a variety of weighing needs.
Features
1. Large LCD screen with backlight, High Sensitivity touch button, easy to operate
2. High Sensitivity Touch button, built-in hook
3. Overload protection pan, under the pan with airflow Draft Shield
4. Display shield provides additional dust and scratch protection to extend the lifespan of Balance
5. With Glass Door Transport Protection Lock, 4-sided fully transparent Glass Draft Shield, one side aluminum alloy back plate
6. Full scale range peeling, four-level shock resistance, adjustable weighing speed
7. All Aluminum Balance Base, Prevents Low Frequency Vibration, The Body Is More Stable
8. Piece count, percentage weighing, gram, ounce, carat and other unit conversions
9. Automatic zero tracking adjustable, super overload protection, automatic fault diagnosis
Principle
The Electronic Precision Balance detects the weight of the weighed object through the High Accuracy Sensor and converts the signal into a digital display. It uses automatic zero tracking and quad shock protection technology to ensure weighing Stability and accuracy. Airflow Draft Shield and Fully Transparent Glass Draft Shield are designed to reduce environmental disturbances and improve Measurement accuracy.
Applications
Laboratory, industrial weighing, quality control, education and research, jewelry weighing, pharmaceutical preparation
Steps
1. Place the Balance on a stable plane and connect the power supply
2. Turn on the power switch and wait for the Balance self-test to complete.
3. Select the weighing mode as required (e.g. piece count or percentage)
4. Place the weighing object on the pan and read the display data
5. Use peeling function to remove container weight
6. Turn off the power after weighing
Notice
• Ensure that the working Ambient Temperature is within the range of 5~ 40 ° C, and the relative humidity does not exceed 85%
• Avoid overloading to prevent damage to the Balance Sensor
• Regularly clean the pan and Draft Shield to keep the equipment clean
Periodic calibration with external test weights to ensure accuracy
• Enable Glass Door Protection Lock during transportation to prevent damage to Glass Door