Overview
FARUI FR-1215 heat aging test machine is used to promote the deterioration of sulfur rubber and plastic, calculate the tensile force and elongation change rate before and after heating. Equipped with a forced hot air circulation Control system to ensure uniform temperature distribution, aging at 70 ° C for 24 hours is about six months in the natural environment.
Features
1.Equipped with forced hot air circulation Control system to ensure uniform temperature distribution
2. Fixed conditions can be set for 0-999 hours, and touch keyboards can be set for fixed or alternating conditions
3. Nine-point fault warning and simple maintenance method
4. Heating and cooling can be used for slope control, with self-correcting temperature reference point function
5. The temperature sensor adopts DIN PT-100Ω (platinum induction)
6. Temperature Control Adopt P.I.D. + S.S.R. System Synchronous Coordinated Control to Improve Stability and Life
7. With P.I.D. automatic calculation function, reducing the inconvenience of human setting
8. Provide warning signals when setting or operation errors occur
9. Safety protection system includes no fuse protection switch, over-temperature automatic shutdown, fan motor overcurrent protector
Principle
The forced hot air circulation Control system uniformly heats the sample in the closed liner to simulate the long-term aging environment. The P.I.D. + S.S.R. system is used to precisely control the temperature, and the temperature is uniformly distributed through the hot air domestic circulation method to accelerate the material deterioration process.
Applications
Electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace and other products testing mass
Standards
CNS-3556、JIS-K6301、ASTM-D2436
Steps
1. Connect AC 220V power supply
2. Set temperature and time parameters via touch keyboard
3. Start the equipment to start the heating cycle
4. Monitor the running status, and deal with any faults according to the warning prompts
5. Automatic stop after reaching the set time
Notice
• Check whether the Power supply voltage meets AC 220V requirements before use
• When it exceeds the temperature, the machine will automatically shut down, and it cannot be turned on until the fault is eliminated.
• Pay attention to fan motor overcurrent protection
Stability of temperature sensors and Control systems
• Keep the equipment well ventilated to avoid blocking the air duct
