Overview
The ECscan 10M-K is a medium-range pen-type Conductivity Meter suitable for the measurement of conductivity values of conventional liquids such as tap water and mineral water, with a measurement accuracy of 1% F.S.
Features
1. Medium Range Pen Design with Platinum Sensor.
2. Support 1 point button calibrating, can use custom calibrating liquid (1000 to 1800 µS/cm).
3. With automatic temperature compensation function to ensure accurate measurement of full scale.
4. Provide key data locking function to instantly retain the current displayed value.
5. With an automatic power-off function, it effectively saves battery energy.
6. Adopt replaceable Electrode to reduce the cost of instrument use and maintenance.
7. It has full waterproof characteristics to ensure the safety of use in harsh environments.
Principle
The instrument measures the conductivity of the solution through its Platinum Sensor (Conductivity detector Electrode) and automatically performs temperature compensation to correct the effect of temperature on the conductivity value, thus ensuring the accuracy of the measurement results.
Applications
Water and wastewater treatment, swimming pools and aquariums, fish farming and hydroponics, beverage industry and other industrial applications
Steps
1. Boot preparation.
2. Perform 1 point calibrating (1413µS/cm standard solution or custom calibrating solution can be used).
3. Electrode immersion in the test solution for measurement.
4. To log data, use the data locking function.
5. Clean Electrode and shut down after use.
Notice
• Please use the specified ECSCAN-C1-100K Sensor and 6-pin connector.
• When calibrating, use a suitable calibrating solution (e.g. 1413µS/cm standard solution).
• The instrument has an automatic shutdown function to save power, and can also be turned off manually.
• Please ensure that it is used within the operation temperature range of 0~ 60 ° C.
• The instrument is fully waterproof, but it is still recommended to pay attention to protection in harsh environments.
• When the battery is exhausted, please replace the G13A button battery (3 pcs).
• Electrode is a consumable and can be replaced to reduce maintenance costs.
