Overview
The TDSscan 10L-E is a low-range pen TDS meter for the measurement of total dissolved solids (TDS) values of low-concentration liquids such as pure water and distillation water with a measurement accuracy of 1% F.S.
Features
1. Low Range Pen TDS Meter with Platinum Electrode Sensor.
2.1 point button calibrate, can use custom calibrating liquid.
3. Adjustable TDS conversion factor to ensure accurate measurement of different water quality.
4. Automatic temperature compensation to ensure accurate measurement of the full range.
5. The key data is locked, and the current displayed value is immediately retained.
6. Automatic power off, effectively saving battery energy consumption.
7. Replaceable Electrode, reducing instrument use and maintenance costs.
8. Full waterproof feature to ensure complete protection of the instrument in harsh environments.
Principle
The product uses its ECSCAN-C1-100K Platinum Electrode Sensor to measure the conductivity of aqueous solutions and convert the conductivity value to the total dissolved solids (TDS) value according to the set TDS conversion factor. The measurement process includes automatic temperature compensation, with a standardized temperature of 25 ° C to ensure the accuracy of measurement at different temperatures.
Applications
Purified water and drinking water measurement, education and other industrial applications
Steps
1. Boot preparation: Install or check Electrode and battery.
2. Calibrate: Use 71.8 ppm calibrating liquid or Miscellaneous custom calibrating liquid for 1 point button calibrating.
3 measurement: Electrode immersed in the liquid to be tested, until the reading is stable.
4. Data locking: If you need to record, you can use the button to lock the current displayed value.
5. Shutdown: Manual shutdown or automatic shutdown after waiting for 8 minutes without operation.
Notice
• Please use the specified ECscan-C1-100K Conductivity detector Electrode for measurement and replacement.
• Calibrating liquid It is recommended to use 71.8 ppm standard liquid or a custom calibrating liquid that meets the requirements.
• The instrument is fully waterproof, but it is still recommended to avoid prolonged immersion or extreme environments.
• Insufficient battery power may affect the measurement accuracy, please replace the G13A button battery in time.
• Make sure the Electrode is fully immersed in the liquid during measurement and avoid touching the wall or bottom of the container.
• Ambient Temperature should be in the range of 0~ 60 ℃, which may affect the measurement results or damage the instrument.
• If the instrument is idle for more than 8 minutes, it will automatically shut down to save power.
