Overview
The TDSscan 10M-K is a pen-type TDS meter suitable for the measurement of total dissolved solids (TDS) values of conventional liquids such as tap water and drinking water, with a measurement accuracy of 1% F.S.
Features
1. Medium Range Pen TDS Meter with Platinum Electrode Sensor.
2.1 point button calibrate, can use custom calibrating liquid.
3. Adjustable TDS conversion factor to ensure accurate measurement of different water quality.
4. Automatic temperature compensation to ensure accurate measurement of the full range.
5. The key data is locked, and the current displayed value is immediately retained.
6. Automatic power off, effectively saving battery energy consumption.
7. Replaceable Electrode, reducing instrument use and maintenance costs.
8. Full waterproof feature to ensure complete protection of the instrument in harsh environments.
Principle
The product uses its ECSCAN-C1-100K Conductivity detector Electrode Sensor to measure the conductivity of the solution and calculate the total dissolved solids (TDS) value of the solution according to the adjustable TDS conversion factor combined with the automatic temperature compensation function.
Applications
Water and wastewater treatment, swimming pools and aquariums, agricultural farming and testing, drinking water, and other industrial applications
Steps
1. Boot preparation.
2. Perform 1 point calibrating (744.7ppm standard liquid or custom calibrating liquid can be used).
3. Immerse Electrode in the solution to be tested.
4. After the reading is stable, you can press the button to lock the data.
5. After use, you can manually shut down or wait for automatic shutdown.
Notice
• Please adjust the appropriate TDS conversion factor within the range of 0.4 to 1.0 according to the water quality to be tested to ensure accurate measurement.
• The instrument has an automatic shutdown function (after 8 minutes of no operation), and can also be turned off manually to save power.
• Electrode is replaceable. When Sensor performance decreases, the ECscan-C1-100K Conductivity detector Electrode can be replaced to reduce maintenance costs.
• The instrument is fully waterproof design, but it is still recommended to clean it in time after use in harsh environments.
• Please use the designated G13A button battery (3 cells) for power supply.
• When calibrating and measuring, ensure that the temperature is within the range of 0~ 50 ° C for accurate automatic temperature compensation.
