Overview
The ECscan-C1-10K Conductivity detector Electrode is a dedicated Conductivity detector Electrode of the BANTE brand, using a platinum Sensor, suitable for ECscan 20/30/40, TDSscan 20 and SALscan 10 meters.
Features
1. Standard Platinum Sensor with stable measurement performance.
2. Built-in temperature sensor, automatic sensing sample temperature value.
Principle
Conductivity detector Electrode through the platinum Sensor measurement of sample conductivity, built-in temperature sensor automatically compensate for the impact of temperature changes on measurement results to ensure data accuracy.
Applications
Water quality testing, laboratory analysis, industrial process control
Standards
Electrode constant specification K = 1
Steps
Connect the Electrode to a compatible meter (e.g. ECscan 20/30/40, TDSscan 20, or SALscan 10).
2. Immerse the Electrode in the sample to be tested, ensuring that the Sensor is in complete contact with the liquid.
3. Wait for the meter to display a stable reading and record the conductivity and temperature values.
4. Clean Electrode after use and store it properly.
Notice
• Operating temperature range is 0~ 60 ℃, avoid using beyond this range.
• Ensure that the Electrode connector is compatible with the meter, using a 6-pin connector.
• Regularly clean the Platinum Sensor to maintain Measurement accuracy.
• Avoid violent collision or damage to Electrode housing (PC material).
