Overview
The Bante321-NH3 Portable Ammonia ion meter is a High Accuracy Portable instrument for outdoor measurement of ammonia Ion concentration in samples with a Measurement accuracy of 1% F.S. The meter is equipped with a large screen backlit LCD display, supports 5 point button calibrating and a variety of Ion concentration unit options.
Features
1. High Accuracy Portable Design with Large Screen Backlit LCD
2.2 to 5 point button calibrated, optional Ion concentration calibrated point
3. Read the Ion concentration value directly to avoid cumbersome conversion and calculation
4. Optional concentration units (ppm, mg/L, mol/L) to meet various measurement needs
5. Automatic temperature compensation to ensure accurate measurement of full scale
6. Automatic calibration reminder, prompt to calibrate regularly
7. Data stability icon, automatically prompt measurement status
8. Automatic end point lock, retain stable Measured value
9. Automatic Electrode Diagnosis, Electrode Very Poor
10. Low battery alarm icon, prompting battery residual power
11. Automatic power off to save battery energy
12. The system menu can customize 8 functions such as the number of calibrated points and Ion concentration units
13. One-click reset function, automatically restore to factory default settings
14. Extended memory, can store up to 500 sets of measurement data
15. Built-in clock automatically marks the date and time of stored data, conforming to GLP specifications
16. USB Communication interface to send data to PC
17. Multi-mode power supply solution (battery, Power Adapter, USB port)
Principle
The ammonia ion meter detects the ammonia Ion concentration in the sample through the ammonia Gas sensing electrode, combined with automatic temperature compensation technology to ensure the measurement accuracy. The meter adopts the principle of ion selective Electrode to directly read the Ion concentration value, and supports manual or automatic end point locking function to stabilize the measurement result.
Applications
Outdoor measurement sample Ammonia Ion concentration
Standards
GLP specification
Steps
1. Turn on the meter power
2. Select Ion concentration unit and number of calibrated points
3. Use standard solution for 2 to 5 point calibrating
4. Electrode immersion in the sample to be tested
5. Read stable Ion concentration values
6. Lock data or store it in memory as needed
7. Transfer data to the computer through the USB interface
Notice
• Periodically calibrated to ensure Measurement accuracy
• Pay attention to the battery level and replace it in time when the battery is low
• Clean Electrode After Use to Extend Service Life
Avoid operating in extreme temperature environments
Make sure the built-in clock is accurate when storing data
• Choose the appropriate Stability standard based on measurement requirements
