Overview
The Bante930-CN is a precision laboratory pH/ion meter with a large screen backlit LCD. The meter supports the measurement of pH value, Oxidation-reduction potential and Ion concentration of liquids. Measurement accuracy is 0.002pH. It can be used with a variety of ion selective Electrodes for a variety of laboratory applications.
Features
1. Precision pH ion meter, support 1 to 5 point button calibrate, automatically identify pH standard buffer.
Optional pH buffer standard (USA/NIST/DIN) or 2 point custom calibrated.
3. Electrode slope display automatically prompts the user whether to replace pH Electrode.
4. In ORP mode, 1 point offset is calibrated to provide accurate readings in relative and absolute mV modes.
5. Ion mode 2 to 5 point button calibrated, automatically identify ion selective Electrode, direct reading Ion concentration value.
6. Optional concentration units (ppm, mg/L, mol/L) to meet various ion measurement needs.
7. Automatic temperature compensation to ensure accurate measurement of full scale.
8. Automatic calibration reminder, destination lock and Electrode diagnostic function.
9. The system menu can customize 10 function parameters, including the number of calibrated points, Display resolution, etc.
10. One-click reset function, expanded memory to store 500 sets of data, built-in clock conforms to GLP specifications, USB Communication interface.
Principle
Measurement accuracy and Stability are ensured by the measurement of pH value, Oxidation-reduction potential or Ion concentration of liquids with pH Electrode, ORP Electrode or Ion Selective Electrode. Customizable calibrated points with automatic temperature compensation technology automatically identify standard buffers and Electrode types.
Applications
Laboratory, water quality monitoring, environment testing, industrial process control, scientific research and education
Standards
GLP specification
Steps
1. Connect Electrode and Power Adapter.
2. Select Measurement mode (pH, ORP or Ion).
3. Perform calibrating: pH mode can be selected from 1 to 5 points calibrate, ORP mode can be calibrated with 1 point offset, and ion mode can be calibrated with 2 to 5 points.
4. Set parameters such as number of calibrated points, resolution, units, etc.
5. Start the measurement, the meter automatically locks the end point and displays the result.
6. Data can be stored or sent to a computer via a USB interface.
Notice
• Make sure the Electrode connection is correct before use to avoid damage.
• Regularly calibrate, it is recommended to set Automatic calibration reminder function.
• Pay attention to the temperature compensation setting during measurement to ensure accuracy.
• Avoid prolonged exposure to humid or extreme environments.
• Clean Electrode after use and store it properly to extend service life.
• Memory capacity when storing data and exporting data in time.
• Follow GLP specifications when operating to ensure data traceability.
