Overview
The A130-CN is a professional laboratory pH/ion meter from the BANTE brand with multiple Measurement modes for pH, ORP, Ion and Water Hardness. The instrument is equipped with a 7-inch TFT display, supports 1000 sets of Data storage, Measurement accuracy up to 0.002pH, and offers 5 ion Measuring methods and multiple calibrating options.
Features
1. Professional laboratory pH ion meter with 7-inch TFT display
2. Optional pH buffer standard (USA/NIST/DIN) or 5 point custom calibrated
3. Electrode diagnostics with Electrode slope and offset display
4. Automatic temperature compensation to ensure accurate measurement over the full range
5. Solution temperature coefficient (STC), compensates for pure water measurement and converts reading to 25 ° C
6. Alarm limit, automatic warning Measured value exceeds the set range
7. ORP mode supports 1 point offset calibrated and relative/absolute mV mode
8. Ion Mode Offers 5 Measuring methods and multiple concentration unit options
9. Water Hardness Mode supports 2 to 5 point calibrates and multiple Hardness Units
10. Extended memory can store up to 1000 sets of data, equipped with USB Communication interface
Principle
Electrode detects the pH value, Ion concentration or ORP value in the sample, combined with automatic temperature compensation technology to ensure measurement accuracy. Measurement accuracy is optimized by multi-point calibrating with Electrode slope diagnostics and calibrating system, and stable readings are retained with data locking.
Applications
Laboratory water quality analysis, environment monitoring, industrial process control, scientific research and education, food and beverage testing, pharmaceutical industry
Standards
USA standard, NIST standard, DIN standard
Steps
1. Electrode and temperature sensors
2. Select Measurement mode (pH/ORP/Ion/Water Hardness)
3. Perform 2 to 5 point calibrating operation
4. Electrode immersion in the sample to be tested
5. Record the Measured value after waiting for the reading to stabilize
6. Storage data can be exported via USB interface
Notice
Electrode calibrated regularly to ensure measurement accuracy
• Check calibrated expiration reminders before use
• Select the correct buffer standard (USA/NIST/DIN)
• Pay attention to temperature compensation settings
• Avoid Electrode Exposure to Air for a Long Time
• Electrode cleaning immediately after use
Maintain Standard Buffer Reagents Properly
