Overview
The BANTE A131-Cn is a precision laboratory ion meter with a 7-inch TFT display and 5 ion Measuring methods. The system menu contains 13 optional parameters for the measurement of Ion concentration and Water Hardness.
Features
1.7-Inch TFT display
2. Optional 5 ion Measuring methods: direct reading method, known addition method, known reduction method, sample addition method, sample reduction method
3. Optional concentration units: ppm, mg/L, mol/L, mmol/L
4.2 to 5 point button calibrated, including 8 concentration calibrated points optional
5. Automatic Identification of Ion Selective Electrodes
6. Electrode management can store 3 ions Electrode slope
7. calibrate expiration reminder function
8. Automatic end point locking
9. Interval reading mode
10. Password protection
11. Extended memory can store 1000 sets of data
12. USB Communication interface
13. One-click reset function
Principle
Measurement principle of potentiometric method is used to detect Ion concentration in liquid by ion selective Electrode. Measurement modes including direct reading and addition are supported. Electrode type is automatically recognized and concentration value is calculated.
Applications
Ion concentration measurement, Hardness testing
Steps
1. Connect Ion Selective Electrode and temperature sensor
2. Measurement mode and method selection
3. Perform 2 to 5 point calibrating
4. Electrode immersion in the solution to be tested
5. Read stable measurement results
6. Can store data or output through USB interface
Notice
• Regularly calibrate the meter
• Use appropriate ionic standard solutions and strength regulators
• Avoid Electrode Exposure to Air for a Long Time
Pay attention to calibrated expiration reminders
• Electrode cleaning immediately after use
• Ensure Power Adapter Voltage is DC12V
