Overview
The BANTE A131-Ag Precision Lab ion meter is a professional instrument with a 7-inch TFT display. 5 ion Measuring methods are available, and the system menu contains 13 optional parameters. The meter is suitable for the measurement of the Ion concentration and water Hardness of liquids, providing High Accuracy Analysis.
Features
The 1.7-inch TFT display provides a clear display interface
2. Optional 5 ion Measuring methods: direct reading method, known addition method, known reduction method, sample addition method, sample reduction method
3. Optional concentration units: ppm, mg/L, mol/L, mmol/L
4.2 to 5 point button calibrated, including 8 concentration calibrated points optional
5. Automatic identification of ion selective Electrodes, no need to specify ion type
6. Electrode management can store 3 ions Electrode slope and call calibrated data
7. Hardness measurement of water quality can be selected in a variety of units: German degree, British degree, French degree, mmol/L, mg/L
8. calibrate expiration reminder function
9. Automatic end point locking function
10. Interval reading mode supports data transfer
11. Password protection
12. Extended memory can store 1000 sets of data
13. USB Communication interface
14. One-click reset function
Principle
The ion meter detects the Ion concentration in the sample by ion selective Electrode, and uses the principle of potentiometry for measurement. The instrument automatically recognizes the type of Electrode and calculates the Ion concentration. Measuring methods and temperature compensation methods are supported to ensure the accuracy and Stability of measurement results.
Applications
Laboratory Ion concentration analysis, Water Hardness testing, Liquid sample measurement
Steps
1. Connect Ion Selective Electrode and temperature sensor
2. Turn on the meter power
3. Measurement mode (Ion concentration or Water Hardness)
4. Perform 2 to 5 point calibrating
5. Measurement parameters and units
6. Electrode immersion in the sample to be tested
7. Read and record Stable Measured values
8. Data can be transferred via USB interface
Notice
• Measurement accuracy by regularly calibrating instruments
• Electrode status and valid period before use
• Avoid Electrode Exposure to Air for a Long Time
• Ensure that the sample temperature is within the range of 0-105 ° C during measurement
• It is recommended to calibrate the reminder function to the appropriate cycle
• Clean Electrode in time after use and store it properly
• Use only original parts and standard solutions
• Avoid violent vibration or impact of the instrument
