Overview
The BANTE A131-Pb is a precision laboratory ion meter with a 7-inch TFT display that supports 5 ion Measuring methods and 13 selectable parameter settings. High Accuracy and Versatility for the measurement of Ion concentration and Water Hardness in liquids.
Features
The 1.7-inch TFT display provides a clear display interface
2. Support 5 ion Measuring methods: direct reading method, known addition method, known reduction method, sample addition method, sample reduction method
3. Optional concentration units: ppm, mg/L, mol/L, mmol/L
4.2 to 5 point button calibrated with 8 concentration calibrated points
5. Automatic identification of ion selective Electrodes, no need to specify ion type
6. Electrode management can store 3 ions Electrode slope and call calibrated data
7. Electrode slope and standard calibrated report
8. Water Hardness Mode supports multiple units: German degree, British degree, French degree, mmol/L, mg/L
9. calibrate expiration reminder function
10. Automatic end point locking function
11. Interval reading mode supports data transfer
12. Password protection
13. Extended memory can store 1000 sets of data
14. USB Communication interface
15. One-click reset function
Principle
The ion meter detects the Ion concentration in liquids by ion selective Electrode. Measurement principle of potentiometry. The meter automatically recognizes the Electrode type and calculates the Ion concentration. Measuring methods and Calibration methods are supported to ensure measurement accuracy. The temperature compensation function can be manually or automatically adjusted to adapt to the measurement needs under different environment conditions.
Applications
Laboratory Ion concentration measurement, Water Hardness testing, environment monitoring, industrial process control, scientific research analysis
Steps
1. Connect Ion Selective Electrode and Temperature Probe
2. Turn on the meter power
3. Measurement mode (Ion concentration or Water Hardness)
4. Measuring method and concentration unit as needed
5. Perform 2 to 5 point calibrating
6. Electrode immersion in the solution to be tested
7. Read and record Stable Measured values
8. Data can be transferred via USB interface
Notice
• Please read the Operation Manual carefully before use
Periodic instrument calibration to ensure measurement accuracy
• Electrode should be cleaned and maintained in time after use
• Avoid Electrode Exposure to Air for a Long Time
• Pay attention to the calibration expiration reminder and re-calibrate on time
• Use the designated Power Adapter
• Memory capacity limit when storing data
• Avoid violent vibration of the instrument during operation
