Overview
The DDS-11AW Laboratory Conductivity Meter is the classic laboratory Conductivity Meter of the BANTE brand, suitable for teaching or production enterprises to measure the conductivity value of liquids. The instrument supports 1 to 3 point button calibrate, has automatic range conversion function, and has a measurement accuracy of 1.5% F.S.
Features
1. Classic Lab Conductivity Meter for Teaching Applications.
2. Automatic range conversion, no need for manual adjustment.
3. Manual temperature compensation to ensure the accuracy of measurement.
4. Built-in system menu, can customize the number of calibrated points, temperature units, data locking mode, shutdown mode and other 6 function parameters.
5. One-click reset (Reset), automatically restore the meter to the factory default settings.
Principle
Conductivity detector Electrode measurement of liquid conductivity value, automatic range conversion, and the use of manual temperature compensation mechanism to correct the impact of temperature on the measurement, to ensure the accuracy of data.
Applications
Teaching and production enterprises
Steps
1. Connect Conductivity detector Electrode and Power Adapter.
2. Use the built-in system menu to set parameters after booting.
3. Select 1 to 3 point calibrating points to calibrate.
4. Electrode immersion in the liquid to be measured for measurement.
5. Use the one-click reset function to restore the default settings.
Notice
• Make sure Electrode is clean and free of contamination before use.
• Conductivity detector standards specified should be used when calibrating.
• Manual temperature compensation needs to be set according to the actual temperature.
• Avoid instrument use in extreme temperatures or Humidity environments.
• Regularly check that the Power Adapter and cable are in good condition.
