Overview
The Bante950-UK is a precision laboratory conductivity /TDS/salinity/resistivity meter with a large screen backlit LCD display. The meter is suitable for the measurement of liquid conductivity, total dissolved solids (TDS), salinity and resistivity values. Measurement accuracy is 0.5% F. S, support 5 point button calibrate and automatic message prompt function.
Features
1. High Accuracy Laboratory Conductivity Meter with Large Screen Backlit LCD
2.1 to 5 point button calibrating, automatic identification Conductivity detector calibrating liquid
3. Optional Electrode constant (K = 0.1/1/10), TDS factor, normalized temperature (20 or 25 ° C), linear and pure water temperature compensation, seawater and practical salinity Measurement mode
4. Automatic temperature compensation to ensure accurate measurement over the full range
5. Automatic end point lock, keep stable Measured value for easy browsing or recording
6. Electrode diagnostics, check Electrode slope value (K)
7. The system menu can customize 11 function parameters such as the number of calibrated points, Stability standard, data locking mode, and automatic shutdown
8. One-click reset (Reset) automatically restores the meter to the factory default settings
9. Extended memory can store up to 500 sets of measurement data
10. Built-in clock automatically marks the time and date of stored data to comply with GLP specifications
11. USB Communication interface to send stored data to PC
Principle
Measured values are converted into parameters such as conductivity, TDS, salinity and resistivity by means of Conductivity detector Electrode measurement of liquid Conductivity detector characteristics, combined with temperature sensor for automatic temperature compensation. The system uses automatic end point locking technology to ensure measurement Stability, and realizes accurate calculation of multiple compensation modes and Measurement modes through built-in algorithms.
Applications
Water and wastewater treatment, scientific research and education, environment monitoring and agricultural breeding, printing and chemical industry, fishery breeding and hydroponic planting, beverage industry and other industrial applications
Standards
GLP specification
Steps
1. Electrode and temperature sensor
2. Select Measurement mode (conductivity /TDS/salinity/resistivity)
3. Perform 1-5 point calibrating (optional automatic identification calibrating liquid)
4. Electrode immersion in the liquid to be tested
5. Wait for the automatic endpoint lock to display a stable reading
6. Manual or automatic storage of measurement data
7. Transfer data to the computer through the USB interface
Notice
• Electrode calibrated before use
• Make sure the Electrode Constant setting matches the Electrode used
• Electrode status and slope values are checked regularly
• Avoid use in extreme temperature environments
• Pay attention to battery power when storing data
• Use the specified calibrating liquid to calibrate
• Maintain Electrode Cleanliness and Proper Storage
