Overview
The A151-DL Laboratory conductivity /TDS/salinity/resistivity meter is a professional precision Conductivity Meter of the BANTE brand, equipped with a 7-inch TFT display, suitable for the measurement of liquid conductivity, total dissolved solids (TDS), salinity and resistivity values. Measurement accuracy is 0.5% F.S.
Features
1. Professional Precision Conductivity Meter with 7-inch TFT Display
2.1 to 5 point button calibrated Conductivity detector standard
3. Optional Electrode constant, match the connected Conductivity detector Electrode and call each Sensor to calibrate the data
4. Optional linear temperature compensation coefficient, pure water compensation coefficient, standardized temperature and TDS conversion factor
5. Automatic temperature compensation to ensure accurate measurement of full scale
6. Alarm limit function, automatic warning Measured value exceeds the set range
7. Calibrate expiration reminder, prompting users to calibrate regularly
8. Automatic end point lock, keep stable Measured value for easy browsing records
9. Interval reading mode, send Measured values to PC or printer regularly
10. Password protection to prevent unauthorized calibrating and setting
11. Extended memory can store up to 1000 sets of data
12. USB Communication interface Easy to connect external devices
13. One-click reset function, automatically restore the meter to the factory default settings
Principle
Conductivity detector Electrode measurement of liquid conductivity and automatic temperature compensation to improve accuracy. It supports a variety of compensation modes, including linear and nonlinear temperature compensation, and pure water compensation to ensure accurate measurement in different environments.
Applications
Laboratory, water quality monitoring, industrial process control, environment monitoring, scientific research and education
Steps
1. Connect Conductivity detector Electrode and temperature probe
2. Power on and select Measurement mode
3. Perform 1 to 5 point calibrating to automatically identify the standard solution
4. Set temperature compensation parameters and TDS conversion factor
5. Start measurement, the meter automatically locks the stable value
6. Export data or connect peripherals through USB interface
Notice
• Regularly calibrate meters to ensure measurement accuracy
• Conductivity detector calibrated with specified standard solution
• Avoid Electrode Pollution and Keep Clean
• Pay attention to the calibration expiration reminder and re-calibrate in time
• Use original accessories to ensure compatibility
Memory capacity limitations when storing data
