Overview
WXQM-2B Horizontal Planetary Ball mill is a heavy-duty equipment, which adopts a double-disk support bracket structure at both ends, which significantly improves the stability and load resistance of the equipment, and solves the problem of limited load of light horizontal Planetary Ball mill. This model is mainly suitable for users in the pilot stage or small batch ground production.
Features
1. Adopt double-disc support bracket structure at both ends, which has stronger equipment stability and load resistance.
2. Solve the limitation of light horizontal planetary Ball mill limited to light load use.
3. Suitable for pilot or small batch ground production.
4. Adopt gear transmission for reliable operation.
5. Supports two or four ball milling tanks to work simultaneously, resulting in high efficiency.
Adopting frequency conversion stepless speed regulation, the speed can be precisely controlled (revolution 35~ 335rpm, rotation 70~ 670rpm).
7. The running time can be set (total time 1-9999min, positive and negative alternation time 1~ 999min), with a high degree of automation.
8. The noise level is low, around 60 +/- 5dB.
Principle
WXQM-2B heavy-duty horizontal planetary Ball mill adopts the principle of planetary motion. The ball mill tank rotates at the same time as the revolution, and the grinding ball in the tank has strong impact, friction and shear effects on the material under the action of centrifugal force, so as to realize the fine grinding and mixing of the material.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Standards
No specific compliance criteria were mentioned in the data.
Steps
1. Select the appropriate ball milling tank and grinding ball according to the material characteristics.
2. Load the material and the grinding ball into the ball mill tank, and the loading amount does not exceed two-thirds of the volume of the ball mill tank.
3. Install the ball mill tank firmly on the equipment station.
4. Set the required total running time (1-9999 minutes) and alternate running time (1-999 minutes).
5. Set the required revolution and rotation speed through the frequency converter.
6. Start the equipment and start the grinding process.
7. After the operation, close the equipment, remove the ball mill tank and separate the material from the grinding ball.
Notice
The maximum sample loading shall not exceed two-thirds of the volume of the milling tank.
• Feed particle size requirements: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
• Make sure that the ball mill tank is firmly installed to prevent loosening during operation.
When the device is running, do not approach or touch moving parts.
• Please connect the power supply correctly according to the power requirements (220V-50HZ).
Equipment weight of 256kg, handling and installation should pay attention to safety.
• Regularly check all components of the equipment to ensure normal operation.
