Overview
WXQM-10B heavy-duty horizontal planetary Ball mill adopts a double-disc two-end support bracket structure, which significantly improves the stability and load resistance of the equipment, breaking through the limitation that the light-duty horizontal planetary Ball mill is only suitable for light loads. The equipment is mainly for users' pilot or small batch ground production needs.
Features
1. Adopt double-disc support bracket structure at both ends, which has stronger equipment stability and load resistance.
2. Break through the light load limitation of light horizontal Ball mill, suitable for a wider range of grinding scenarios.
3. Mainly for pilot or small batch ground production, to meet the needs of research and development and small-scale production.
4. Adopt gear transmission for reliable operation.
5. Supports two or four ball milling tanks to work simultaneously, resulting in high efficiency.
6. Equipped with a frequency conversion stepless speed regulation system, it can precisely control the revolution and rotation speed.
7. The running time is programmable and supports alternating positive and negative running modes.
Principle
WXQM-10B heavy-duty horizontal planetary Ball mill works based on the principle of planetary motion. The ball mill tank rotates at high speed while rotating, and the grinding ball in the tank produces strong impact, extrusion and friction on the material under the action of centrifugal force, so as to realize the fine grinding and mixing of the material.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Steps
1. Select the appropriate ball milling tank and grinding ball according to the material characteristics, and the sample loading does not exceed two-thirds of the volume of the ball milling tank.
2. Install the ball mill tank filled with materials correctly on the station of the equipment.
3. Set the required revolution and rotation speed through the inverter control panel.
4. Set the total operating time of the equipment and the time parameters for alternating positive and negative operation.
5. Start the equipment and start the grinding process.
6. After the operation, the equipment automatically stops, take out the ball mill tank and collect the ground material.
Notice
• The maximum sample loading shall not exceed two-thirds of the volume of the ball milling tank to avoid affecting the grinding effect or damaging the equipment.
• Feed particle size must meet the requirements: soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
• Before the equipment runs, please ensure that the ball mill tank is firmly installed to avoid peeling during high-speed operation.
Do not make any adjustments or touch moving parts while the equipment is running.
• Regularly perform maintenance inspections on equipment to ensure it is in good working condition.
