Overview
WXQM-12B heavy-duty horizontal planetary Ball mill adopts a double-disc support bracket structure at both ends, which improves the stability and load resistance of the equipment and breaks through the limitations of light-duty horizontal planetary Ball mill. The equipment is mainly suitable for users' pilot or small batch ground production.
Features
1. The use of double disc support bracket structure at both ends significantly improves equipment stability and load resistance.
2. Suitable for pilot or small batch ground production, breaking through the limitations of light load use.
3. With gear transmission, the working mode is flexible, allowing two or four ball milling tanks to work simultaneously.
4. Equipped with a frequency conversion stepless speed regulation system, it can precisely control the revolution and rotation speed.
5. Running time programmable setting, support positive and negative alternating operation, high degree of automation.
Principle
The equipment is a horizontal planetary Ball mill, and its Working Principle is based on planetary motion. The ball mill tank rotates at a high speed while rotating around the main axis of the equipment. The grinding ball in the tank has a strong impact, extrusion and grinding effect on the material under the combined action of centrifugal force, Coriolis force and friction, so as to realize the ultra-fine grinding and mixing of the material.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Steps
1. Select the appropriate ball milling tank and grinding ball according to the material characteristics.
2. Load the material and the grinding ball into the ball mill tank, and the loading amount does not exceed two-thirds of the volume of the ball mill tank.
3. Install the ball mill tank firmly on the equipment station.
4. Set the required revolution and rotation speed, total running time, and alternating positive and negative running time through the frequency converter.
5. Start the equipment and start the grinding process.
6. After the operation, the equipment automatically stops, takes out the ball mill tank and separates the material from the grinding ball.
Notice
The maximum sample loading shall not exceed two-thirds of the volume of the milling tank.
• Feed particle size requirements: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
• Do not open the protective cover or perform Miscellaneous operations during the operation of the equipment.
• Regularly check the fastening parts of the equipment to ensure that the connection is firm.
• Please connect the power supply according to the rated voltage of the equipment (220V-50HZ).
Equipment weight is large (370kg), handling and installation should pay attention to safety.
