Overview
WXQM-20B heavy-duty horizontal planetary Ball mill adopts a double-disc two-end support bracket structure, which significantly improves the stability and load resistance of the equipment, and breaks through the limitation of light-duty horizontal planetary Ball mill only for light loads. The equipment is mainly suitable for users' pilot or small batch ground production.
Features
1. Adopt double-disc support bracket structure at both ends, with high equipment stability and strong load resistance.
2. Suitable for pilot or small batch ground production.
3. Can run two or four ball milling tanks simultaneously, with a large processing capacity.
4. Adopt frequency conversion stepless speed regulation, and the speed can be precisely controlled.
5. The running time can be programmed to support alternating positive and negative operation.
Principle
The equipment is a horizontal planetary Ball mill, which drives the ball mill tank to perform planetary motion through gear transmission, that is, the ball mill tank rotates while rotating around the spindle. This compound motion causes strong impact, friction and shear force between the grinding ball and the material, so as to realize fine grinding and mixing of the material.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Steps
1. Select the appropriate ball milling tank and grinding ball according to the material characteristics.
2. Load the material and the grinding ball into the ball mill tank, and the loading amount does not exceed two-thirds of the volume of the ball mill tank.
3. Install the ball mill tank firmly on the equipment station.
4. Set the required revolution and rotation speed through the frequency converter.
5. Set the total running time and the alternating running time.
6. Start the equipment and start the grinding process.
7. After the operation, close the equipment, remove the ball mill tank and separate the material from the grinding ball.
Notice
* Feed particle size must meet the requirements: soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
The sample loading shall not exceed two-thirds of the volume of the milling tank.
Make sure that the ball mill tank is firmly installed to prevent loosening during operation.
* Power frequency of equipment is 380V-50HZ, need to match the corresponding power supply.
* The noise level when the equipment is running is about ≤ 60 +/- 5dB, please pay attention to the working environment.
* Equipment weight of 700kg, handling and installation should pay attention to safety.
* Please follow the Equipment Operation Manual for maintenance and maintenance.
