Overview
WXQM-100B heavy-duty horizontal planetary Ball mill adopts a double-disc support bracket structure at both ends, which improves the stability and load resistance of the equipment and breaks through the limitations of light-duty horizontal planetary Ball mill. The equipment is mainly suitable for users' pilot or small batch ground production.
Features
1. The use of double disc support bracket structure at both ends significantly improves equipment stability and load resistance.
2. Suitable for pilot or small batch ground production.
3. Support two or four ball milling tanks to work simultaneously.
4. Adopt frequency conversion stepless speed regulation to precisely control revolution and rotation speed.
5. The running time can be set, and the alternating operation mode of positive and negative is supported.
6. The maximum sample loading capacity can reach two-thirds of the volume of the ball mill tank, and the processing capacity is large.
Principle
The equipment is a horizontal planetary Ball mill, which drives the ball mill tank to carry out the compound planetary motion of revolution and rotation through gear transmission. The material is hit, squeezed and rubbed by the grinding ball in the ball mill tank, so as to realize crushing, mixing and grinding. The frequency conversion speed control system can precisely control the speed to adapt to the grinding needs of different materials.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Standards
The data did not mention specific compliance criteria.
Steps
1. Select the appropriate ball milling tank and grinding ball according to the material characteristics.
2. Put the material and grinding ball into the ball mill tank, and the loading amount does not exceed two-thirds of the tank volume.
3. Install the ball mill tank on the equipment station and fix it.
4. Set the required total running time, alternating positive and negative running time, and revolution/rotation speed through the control panel.
5. Start the equipment and start the grinding process.
6. After the operation, the equipment automatically stops, take out the ball mill tank and collect the ground material.
Notice
• Feed particle size needs to be controlled: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
The maximum sample loading shall not exceed two-thirds of the volume of the milling tank.
• Power frequency of the equipment is 380V-50HZ, it is necessary to ensure that the power supply matches.
• Please check whether the installation of the ball mill tank is firm before operation.
• There is noise when the equipment is running, please pay attention to the operating environment.
• Do not disassemble or adjust the equipment while it is running.
