Overview
The omnidirectional planetary ball mill QXQM-4 is based on the vertical planetary ball mill, adding the planetary disk flip function, the planetary disk and the ball mill can do the planetary motion at the same time, and can do 360 ° tipping bucket flip in a three-dimensional space range, realize the multi-dimensional and multi-directional movement of the ball mill tank, improve the degree of grinding ball and material disordered movement, the whole material has no dead angle grinding in the grinding tank, so that the ground material is more uniform, and can solve the problem of part of the material sinking and sticking to the tank.
Features
1. Equipment Shell Professional Appearance Design and Industrial Modeling, Lean Manufacturing, Exquisite and Fine.
2. Machined parts adopt numerical control processing technology, and the transmission gear adopts special material precision gear to ensure smooth, safe and low noise when the equipment runs at high speed.
3. The flip motor is equipped with a brake lock function, which can be turned to stop at any angle, making it safe and reliable.
Principle
The equipment adopts gear transmission, the planetary disc and the ball mill can rotate and rotate at the same time, and can do 360 ° tipping bucket flip in a three-dimensional space range to realize the multi-dimensional and multi-directional movement of the ball mill tank, so that the grinding balls and materials are disordered in the tank, and there is no dead angle grinding.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite and other products
Steps
1. Select the appropriate ball milling tank (available specifications: 250-1000ml or 0.05-0.5L) according to the material characteristics and fill it with the material, with the sample loading amount not exceeding two-thirds of the volume of the ball milling tank.
2. Install the ball mill tank filled with materials on the equipment station (up to 4 can be installed simultaneously).
3. Set the operating parameters through the frequency converter: set the total running time (1-9999min), the alternating running time (1-999min), the revolution speed (35-335rpm) and the rotation speed (70-670rpm).
4. Start the equipment and start the grinding process.
5. After the operation, the equipment stops, and the brake lock function of the flip motor can be used to stop the flip at any angle, and the ball mill can be safely removed.
Notice
• Feed particle size should be noted: Soil material should be ≤ 10mm, Miscellaneous material should be ≤ 3mm.
• The maximum processing capacity is 4L, please do not overload the operation.
• Power frequency of the device is 220V-50HZ, please make sure the power supply matches.
The noise level of the equipment is about 60 +/- 5dB, please use it in a suitable environment.
• The weight of the equipment is 317kg, and it is necessary to ensure that the ground is flat and stable during installation.
• Please follow the maximum loading capacity of the equipment, that is, two-thirds of the volume of the ball mill tank, to ensure the grinding effect and equipment safety.
