Overview
The omnidirectional planetary ball mill QXQM-6 is based on the vertical planetary ball mill, adding the planetary disk flip function, the planetary disk and the ball mill can do the planetary motion at the same time, and can do 360 ° tipping bucket flip in a three-dimensional space range, realize the multi-dimensional and multi-directional movement of the ball mill tank, improve the degree of grinding ball and material disordered movement, and the whole material has no dead angle grinding in the grinding tank, so that the ground material is more uniform, and can solve the problem of part of the material sinking and sticking to the tank.
Features
1. Equipment Shell Professional Appearance Design and Industrial Modeling, Lean Manufacturing, Exquisite and Fine.
2. Machined parts adopt numerical control processing technology, and the transmission gear adopts special material precision gear to ensure smooth, safe and low noise when the equipment runs at high speed.
3. The flip motor is equipped with a brake lock function, which can be turned to stop at any angle, making it safe and reliable.
Principle
The device is driven by gears to make the ball mill tank perform planetary motion of revolution and rotation at the same time. On this basis, the planetary disk can be flipped 360 °, so that the ball mill tank moves in multiple dimensions and directions in the three-dimensional space, thereby improving the movement of the grinding ball and the material. The degree of disorder is realized, and the material is ground in the grinding tank without dead ends.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite and other products
Steps
1. Select the appropriate ball milling tank (specification 0.05L-25L) according to the material characteristics, and the sample loading does not exceed two-thirds of the volume of the ball milling tank.
2. Install the ball mill tank on the four stations of the equipment.
3. Set the total running time (1-9999 minutes), the alternating running time (1-999 minutes), and the rotation speed (35-335rpm) and rotation (70-670rpm) through the frequency converter.
4. Start the equipment, and the ball mill tank starts to perform planetary motion and flipping motion.
5. After the operation, the equipment stops, and the ball mill can be taken out to obtain the ground material.
Notice
• Feed particle size should be noted: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
• The maximum processing capacity is 6L, please do not overload the operation.
• There is noise when the equipment is running (about 60 +/- 5dB), please use it in a suitable environment.
• The equipment is heavy (317kg), and it is necessary to ensure that the ground is flat and stable during installation.
• Power frequency is 220V-50HZ before use.
