Overview
QXQM-12 omni-directional planetary Ball mill is based on the vertical planetary Ball mill, adding the planetary disk flip function, planetary disk and ball mill can do planetary motion at the same time, but also in a three-dimensional space range to do 360 ° tipping bucket flip, to achieve multi-dimensional multi-directional movement of ball mill tank, improve the degree of grinding ball and material disordered movement, the whole material in the grinding tank without dead angle grinding, so that the ground material is more uniform, and can solve the problem of some materials sinking and sticking to the tank.
Features
1. Equipment Shell Professional Appearance Design and Industrial Modeling, Lean Manufacturing, Exquisite and Fine.
2. Machined parts adopt numerical control processing technology, and the transmission gear adopts special material precision gear to ensure smooth, safe and low noise when the equipment runs at high speed.
3. The flip motor is equipped with a brake lock function, which can be turned to stop at any angle, making it safe and reliable.
Principle
On the basis of the planetary motion (revolution and rotation) of the traditional planetary ball mill, the equipment adds the 360 ° tipping bucket flip function of the planetary disk. This makes the ball mill tank perform multi-dimensional and multi-directional composite motion in three-dimensional space, which greatly enhances the disordered collision and grinding between the grinding ball and the material, and realizes that the material has no dead ends in the tank, so as to obtain a more uniform and fine grinding effect, and effectively prevents the material from sinking to the bottom or sticking to the tank wall.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, oxidation Zinc powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite
Steps
1. Select the appropriate ball mill tank and grinding ball according to the material characteristics, and the sample loading does not exceed two-thirds of the volume of the ball mill tank.
2. Install the ball mill tank containing the material symmetrically on the planetary disk and fix it.
3. Set the total running time (1-9999 minutes), the alternating running time (1-999 minutes), and the revolution/rotation speed (35-290rpm, 70-580rpm) through the device control panel.
4. Start the device, and the planetary disk begins to perform planetary motion and reversal motion.
5. After the operation is completed, the equipment is stopped, and the flip motor can be operated to adjust the astrolabe to a suitable angle for unloading.
Notice
• Please ensure that the feed particle size meets the requirements: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
When the equipment is running, do not approach or touch moving parts.
• Note that the maximum processing capacity of the device is 12L, please do not overload it.
• The weight of the equipment reaches 420kg, and it is necessary to ensure that the ground is flat and stable during installation.
• Power frequency is 220V-50HZ before use.
• Regularly check the transmission components to ensure smooth operation and low noise.
