Overview
QXQM-16 omnidirectional planetary ball mill is based on the vertical planetary ball mill, adding the planetary disk flip function. While the planetary disk and ball mill can do planetary motion, they can also do 360 ° tipping bucket flip in a three-dimensional space range, realizing multi-dimensional and multi-directional movement of the ball mill tank, improving the degree of disordered movement of the grinding ball and the material, so that the whole material has no dead angle grinding in the grinding tank, and the ground material is more uniform, and can solve the problem of some materials sinking to the bottom and sticking to the tank.
Features
1. Equipment Shell Professional Appearance Design and Industrial Modeling, Lean Manufacturing, Exquisite and Fine.
2. Machined parts adopt numerical control processing technology, and the transmission gear adopts special material precision gear to ensure smooth, safe and low noise when the equipment runs at high speed.
3. The flip motor is equipped with a brake lock function, which can be turned to stop at any angle, making it safe and reliable.
Principle
The device simultaneously performs planetary motion and 360 ° tipping bucket flip through the planetary disc and the ball mill tank to realize the multi-dimensional and multi-directional motion of the ball mill tank in the three-dimensional space. This composite motion greatly improves the disordered motion of the grinding ball and the material, so that the material has no dead angle in the grinding tank to grind, so as to obtain a more uniform grinding effect, and helps to solve the problem of material sinking and sticking to the tank.
Applications
Geology, Minerals, Metallurgy, Electronics, Building Materials, Pottery and porcelain, Chemical Industry, Light Industry, Environmental Protection, Electronic Pottery and porcelain, Structural Pottery and porcelain, Magnetic Materials, Lithium Cobalt Oxide, Lithium Manganese Oxide, Catalyst, Phosphor, Long Afterglow Luminescent Powder, Rare Earth Polishing Powder, Electronic Glass Powder, Fuel Cell, Zinc Oxidation Varistor, Piezoelectric Pottery and porcelain, Nanomaterials, Wafer Pottery and porcelain Capacitors, MLCC, Thermistors (PTC, NTC), ZnO Varistors, Dielectric Pottery and porcelain, aluminum oxide Pottery and porcelain, Zirconia Pottery and porcelain, Phosphor, Zinc oxidation powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite and other products in the production field.
Steps
1. Select the appropriate ball milling tank (specification: 2~ 4L or 1~ 3L) and grinding ball according to the material characteristics.
2. Load the material into the ball milling tank, and the loading amount shall not exceed two-thirds of the volume of the ball milling tank.
3. Install and fix the ball mill tank on the planetary disk.
4. Set the operating parameters through the frequency converter: set the total running time (1-9999 minutes), the alternating running time (1-999 minutes), and the rotation speed (30-255rpm or 60-510rpm).
5. Start the equipment and start the grinding process.
6. After the grinding is over, the equipment stops, and the planetary disk can be turned to a suitable angle by using the brake lock function of the flip motor for unloading.
Notice
• Feed particle size must meet the requirements: soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
The maximum sample loading shall not exceed two-thirds of the volume of the milling tank.
• Power frequency of the device is 380V-50HZ, please make sure the power supply matches.
• Do not approach the equipment when it is running, and pay attention to safety.
• Regularly check the transmission components to ensure smooth operation.
• The equipment is heavy (550kg), and it is necessary to ensure that the ground is flat and stable during installation.
