Overview
OSP-15 L2000φ 16 formed steel wire coating bar is a professional Spreader tool produced by the Japanese OSP brand. It is made by extrusion process, made of 304 stainless steel, and has a chrome-plated surface. This product is designed to replace the traditional steel wire coating bar to solve the problems of loose steel wire, broken wire, difficult to clean and unable to freely change the surface shape. It can precisely control the wet film thickness to 1.5μm to achieve ultra-thin Spreader.
Features
1. Made by extrusion process to avoid the problem of loose wire and broken wire of traditional steel wire coating bar.
2. Easy to clean, not easy to clog, improving ease of use.
3. The surface shape can be freely changed to adapt to different Spreader requirements.
4. The bottom of the groove is wider, and the Coating Weight is generally larger than that of the traditional steel wire coating bar.
5. The minimum wet film thickness can be controlled to 1.5μm, supporting ultra-thin Spreader.
Principle
Spreader liquid on the surface of the substrate, using D-Bar formed wire coating bar to adjust (scrape off) the amount of liquid, through its groove design to precisely control the thickness of Spreader, to achieve uniform Spreader.
Applications
Film, Glass, Paper, Encasement Material, Tape, Magnetic Card
Steps
1. Spreader liquid on the surface of the substrate.
2. Use D-Bar formed wire coating bar to scrape off excess liquid and adjust Coating Weight.
Notice
• Specifications and lengths can be customized, please consult customer service to confirm before use.
• Pay attention to control the strength when Spreader to avoid affecting the uniformity of Spreader.
