Overview
The BIO0021 SK Quattro Shaker is an orbital oscillator with a vibration revolutions range of 200 to 1200 rpm and a track diameter of 3mm. It features a maintenance-free brushless DC motor with a long service life and can accommodate up to 4 PCR plates. It supports 6-well, 24-well foster plates and Miscellaneous microplate models.
Features
1. Vibration revolutions range from 200 to 1200 rpm, track diameter 3mm; 2. Maintenance-free brushless DC motor with long service life; 3. Shake speed is gradually increased to avoid liquid overflow; 4. Digital display speed and timing function, the speed setting is changed by 10 RPM, and the timer can be set for 1 minute to 999 minutes; 5. Programming pulse function (reverse motion), which can be set for 30 to 99 seconds; 6. Up to 4 PCR plates can be placed, compatible with 6-well, 24-well foster plates and Miscellaneous microplates; 7. Maximum load is 2kg, and the noise level is less than 60dB.
Principle
The Shaker uses an orbital oscillation mode to drive the sample platform through a DC motor for circular motion with a track diameter of 3mm. The programming pulse function allows the device to move alternately clockwise or counterclockwise to enhance the mixing effect.
Applications
PCR plate processing, cell fostering, microplate oscillation, laboratory sample mixing
Steps
1. Connect the device to a 100-240V AC 50/60Hz power supply; 2. Place the sample to ensure that the total load does not exceed 2kg; 3. Set the Oscillation Frequency through the control panel, the range is 200~ 1200rpm, adjusted in 10 RPM increments; 4. Set the timer, the range is 1~ 99 minutes or select the unlimited operation mode; 5. Optional setting of the programming pulse function to adjust the reverse movement time to 30 to 99 seconds; 6. Start the device and observe the LED display to confirm the running status.
Notice
* Ensure that the Power supply voltage is within the range of 100-240V AC; * The maximum load does not exceed 2kg to avoid overload; * The timer setting needs to be selected between 1~ 99 minutes or unlimited mode; * When using the programming pulse function, pay attention to the reverse motion time setting; * The equipment shell Protection Rating is IP 20 to avoid use in humid or dusty environments; * The operating noise is lower than 60dB to ensure operation in a quiet laboratory environment; * Regularly check the sample placement to prevent liquid overflow.
