Overview
The BIO0021 SK 3D-5 Shaker is a rolling and rocking laboratory device with a shaking speed range of 10 to 120rpm and a tilt angle of 7 degrees, with a maximum load bearing capacity of 5 kg. It is equipped with digital speed and timing settings for a variety of hybrid applications.
Features
1. Shaking speed range 10 to 120rpm, 7 degrees of inclination, maximum load-bearing 5kg
2. Digital display speed and timing settings, support a variety of speed mixing
3. The microcontroller has a pulse mode function (run-pause-run mode).
4. Timer Range from 1 minute to 999 minutes
5. Platform size 350 x 350 mm with rubber pad
6. Achieve a good mixing effect by rolling and rocking motion
7. Shell Protection Ratings 21
Principle
The Shaker uses rolling and rocking motion to achieve mixing, the microcontroller controls the shake speed and timing, and the pulse mode can be alternately run and paused to ensure a uniform mixing effect.
Applications
Laboratory, biotechnology, chemical analysis, pharmaceutical industry
Standards
Shell Protection Rating 21
Steps
1. Connect power supply 100-200VAC 50/60Hz
2. Set the required shake speed 10-120rpm
3. Set Timer Range 1-999 minutes
4. Place the sample on the tray with a maximum load of 5kg
5. Start the device for mixing operation
Notice
• Power supply voltage within 100-200VAC range
• Maximum load-bearing capacity does not exceed 5kg
• Check that the tray rubber pad is in good condition before use
Avoid operating in humid environments to maintain Protection Ratings
• Timing setting should not exceed 999 minutes
