Overview
The BIO0021 MS 10MD Magnetic Stirrer is a highly efficient laboratory device with a closed design for easy cleaning and leak protection. The upper panel is stainless steel to prevent corrosion and the bottom rubber base is non-slip. It supports a speed setting range of 200rpm to 2200rpm, pulse mode with direction change function, pulse timing can be set between 30 and 99 seconds, and Max.stirring Capacity is 10L.
Features
Speed settings range from 200rpm to 2200rpm.
2. Pulse mode with direction change function, pulse timing can be set between 30 and 99 seconds.
3. Closed design for easy cleaning and leak prevention.
4. The upper panel is made of stainless steel to prevent corrosion.
5. The bottom rubber base is non-slip.
Principle
The Magnetic Stirrer generates a swirl/spin magnetic field through the built-in magnet, which drives the stirrer swirl/spin to achieve liquid mixing. The pulse mode enhances the stirring effect by periodically changing the swirl/spin direction, and the timing function can preset the running time.
Applications
Laboratory, chemical industry, biotechnology, pharmaceuticals, education
Steps
1. Place the device on a smooth surface and connect it to a power source.
2. Set the stirring speed between 200rpm and 2200rpm as required.
3. Optional setting of pulse mode, timing between 30 and 99 seconds.
4. Start the equipment for mixing operation.
5. Turn off the power and clean the equipment after use.
Notice
• Power supply voltage in the 100-200VAC range.
• Avoid operating in humid environments to prevent electric shock.
• Use a soft cloth to wipe when cleaning and avoid the use of corrosion cleaners.
• The amount of stirring does not exceed the maximum capacity of 10L.
• Do not touch the swirl/spin parts while the device is running.
