Overview
The BIO0021 MS 25L Magnetic Stirrer is a highly efficient laboratory device with a closed design for easy cleaning and leak resistance, stainless steel on the upper panel for corrosion resistance, and a rubber base on the bottom for slip resistance for a variety of mixing applications.
Features
1. Speed setting range 200rpm - 2200rpm, speed regulation accuracy +/- 10rpm
2. Pulse mode with direction change function, pulse timing can be set between 30 and 99 seconds
3. Closed design for easy cleaning and leak prevention
4. Upper panel stainless steel material, anti-corrosion
5. Anti-skid bottom rubber base
Principle
The Magnetic Stirrer drives the rotor swirl/spin by internal magnetism to achieve liquid stirring, the pulse mode can change the stirring direction, and the timing function allows precise control of the stirring time.
Applications
Laboratory, chemical industry, biopharmaceutical, education and research
Steps
1. Stirrer placed on a smooth surface, connected to the power supply
2. Choose stirring speed (200~ 2200rpm) and Timer Range (1~ 999min or ∞) as needed
3. Start the device and adjust the pulse mode (if necessary).
4. Turn off the power after use and clean the equipment
Notice
• Ensure the working environment drying to avoid liquid leakage
• Use the recommended rotor length of 60mm to optimize performance
• Regularly check equipment status to prevent corrosion
• Pay attention to anti-skid during operation and avoid moving the device
