Overview
The BIO0021 MS 200L Magnetic Stirrer is a professional laboratory equipment with a closed design for easy cleaning and leak resistance, suitable for high volume mixing needs. The equipment has precise speed control and timing functions to ensure efficient and safe experimental processes.
Features
1. Speed setting range 200rpm to 2200rpm, speed regulation accuracy +/- 10rpm
2. Pulse mode with direction change function, pulse timing can be set between 30 and 99 seconds
3. Closed design for easy cleaning and leak prevention
4. The upper panel is made of stainless steel, anti-corrosion
5. The bottom is equipped with a rubber base, which is non-slip and stable
6. Timer Range 1~ 999 minutes or unlimited operation
7. Max. Capacity of stirring up to 200L to meet large capacity needs
Principle
The Magnetic Stirrer uses an internal magnetic force to drive the rotor swirl/spin to achieve uniform mixing of liquids. The device uses a pulse mode to change the direction of stirring, and the timing function precisely controls the running time to ensure a stable and efficient mixing process.
Applications
Laboratory, Chemical, Pharmaceutical, Biotechnology, Food processing, Education and research
Standards
IP21 Protection Ratings
Steps
1. Place the equipment on a smooth surface to ensure that the rubber base is non-slip
2. Set the stirring speed within the range of 200-2200rpm according to requirements
3. If you need pulse mode, set the pulse timing between 30 and 99 seconds
4. Set Timer Range 1-999 minutes or select Unlimited Time Run
5. Place the appropriate rotor (recommended length 60mm) and start mixing
6. Clean the upper panel after use and keep the equipment drying
Notice
Do not use in humid environments to comply with IP21 protection requirements
• Max. stirring Capacity does not exceed 200L to avoid overload operation
• Ensure that the container is placed within the working disc size of 250 * 250mm
• Regularly check the anti-skid performance of the rubber base
• Use mild detergent when cleaning to avoid corrosion of stainless steel panels
• Pay attention to the speed regulation accuracy of +/- 10rpm when setting the speed
• Pay attention to the timing setting range when using the pulse mode
