Overview
JINGHAI FA1004N (internal calibration) Electronic Analytical Balance is a High Accuracy Weighing Instrument with a New Generation Electromagnetic Equilibrating Weighing Sensor, with Full Auto Internal Cal function, suitable for laboratory mass analysis. The product has a novel structure and is equipped with an oversized soft backlit LCD display, which is easy to operate and has superior performance to ensure accurate weighing and reading.
Features
1. Novel structure, large soft backlit LCD display, easy to operate and superior performance
2. Fully automatic fault detection to ensure the safe use of the product
3. Using a new generation of electromagnetic equilibrating Sensor, product accuracy is guaranteed
4. External Power Adapter ensures accurate weighing and reading
5. Internal RS232 interface, which can be connected to external devices such as computers/printers
6. Auto Internal Cal, accurate and reliable, calibrated quickly
7. With general weighing, counting weighing, percentage weighing and other weighing methods and unit conversion functions
8. With overload, underload alarm, four-level shockproof, dynamic temperature compensation, full scale peeling, accumulation/accumulation, bottom hook weighing and other functions
Principle
The Electronic Analytical Balance uses an electromagnetic equilibrating Weighing Sensor for measurement, and achieves accurate weighing through the principle of electromagnetic force and object gravity equilibrating. The full Auto Internal Cal function ensures weighing accuracy, and dynamic temperature compensation and four-stage shock protection design further ensure weighing Stability.
Applications
Laboratory mass analysis
Steps
1. Place the Balance on the water platform surface and adjust it to a horizontal state through the level
2. Connect the Power Adapter to the power outlet and turn on the power supply
3. Select the weighing mode as needed (general weighing, counting weighing, percentage weighing, etc.)
4. Place the item to be tested on the pan for weighing
5. Use peeling function to remove container weight
6. Connect external devices (such as computers or printers) through the RS232 interface for data transmission
7. Turn off the power after use
Notice
• Make sure the Balance is placed horizontally before use
• Avoid overloading to prevent damage to the Sensor
• Operating temperature range is 0~ 40 ℃, do not use in an environment beyond the range
• Periodic internal calibrating to ensure weighing accuracy
• Keep the pan clean to avoid foreign objects affecting the weighing results
• Power supply voltage needs to match 220V 50Hz, use the original Power Adapter
• Pay attention to handle with care when transporting and moving to prevent vibration from affecting the accuracy
