Overview
JINGHAI FA2204N (internal calibration) Electronic Analytical Balance is a High Accuracy Weighing Instrument with Electromagnetic Equilibrating Weighing Sensor, with Full Auto Internal Cal function, suitable for laboratory mass analysis. The product has a novel structure and is equipped with an oversized soft backlit LCD display, which is easy to operate and has superior performance to ensure accurate weighing and reading.
Features
1. Novel structure, large soft backlit LCD display, easy to operate and superior performance
2. Fully automatic fault detection to ensure the safe use of the product
3. Using a new generation of electromagnetic equilibrating Sensor, product accuracy is guaranteed
4. External Power Adapter ensures accurate weighing and reading
5. Internal RS232 interface, which can be connected to external devices such as computers/printers
6. Auto Internal Cal, accurate and reliable, calibrated quickly
7. With general weighing, counting weighing, percentage weighing and other weighing methods and unit conversion functions
8. With overload, underload alarm, four-level shockproof, dynamic temperature compensation, full scale peeling, accumulation/accumulation, bottom hook weighing and other functions
Principle
Using a new generation of electromagnetic equilibrating type weighing Sensor, High Accuracy weighing is achieved through the principle of electromagnetic force equilibrating. Full Auto Internal Cal function ensures weighing accuracy and Reliability, and dynamic temperature compensation technology adapts to changes in the environment to ensure measurement Stability.
Applications
Laboratory mass analysis
Steps
1. Balance in the horizontal position and adjust the level through the level
2. Connect the Power Adapter to the power outlet
3. Turn on the power switch and wait for the Balance self-test to complete.
4. Select the weighing mode as required (e.g. general weighing, counting weighing, percentage weighing)
5. Place the sample on the pan for weighing
6. Use peel function to remove container weight
7. Data transmission can be performed by connecting external devices through the RS232 interface
8. Turn off the power after use, clean and maintain
Notice
• Ensure that Balance is placed in a horizontal and stable position to avoid vibration interference
• Check the level before use to ensure that the instrument is in a level state
• Avoid overloading to prevent damage to the Sensor
• Operating temperature range is 0~ 40 ℃, need to operate in a suitable environment
Periodically calibrated internally to maintain accuracy
• Keep the pan clean to avoid contamination affecting the weighing results
• Power supply voltage needs to match 220V 50Hz, use the original adapter
• Shipping and Storage Shockproof to Avoid Strong Impacts
