Overview
JINGHAI FA3104N (external calibration) Electronic Analytical Balance is a High Accuracy weighing instrument, using a new generation of electromagnetic equilibrate weighing Sensor, with a large soft backlit LCD display, easy to operate and superior performance. The product supports external calibrate, weighing range is 0~ 310g, Minimum Weight 0.1mg, suitable for laboratory mass analysis and other scenarios.
Features
1. Novel structure, large soft backlit LCD display, easy to operate and superior performance
2. Fully automatic fault detection to ensure the safe use of the product
3. Using a new generation of electromagnetic equilibrating Sensor, product accuracy is guaranteed
4. External Power Adapter ensures accurate weighing and reading
5. Internal RS232 interface, which can be connected to external devices such as computers/printers
6. With general weighing, counting weighing, percentage weighing and other weighing methods and unit conversion functions
7. With overload, underload alarm, four-level shockproof, dynamic temperature compensation, full scale peeling, accumulation/accumulation, bottom hook weighing and other functions
Principle
The Electronic Analytical Balance uses Electromagnetic Equilibrating Sensor technology to achieve accurate weighing through the principle of electromagnetic force and gravity equilibrating. The fully automatic fault detection system ensures safe use, and the external Power Adapter provides stable power supply to ensure weighing accuracy and reading accuracy.
Applications
Laboratory mass analysis
Steps
1. Place the Balance on a stable table and adjust the level state through the level
2. Connect the Power Adapter to the power outlet
3. Turn on the power switch and wait for the system to initialize.
4. Select the weighing mode according to your needs (general weighing, counting weighing, percentage weighing, etc.)
5. Place the sample in the pan for weighing
6. Data can be transmitted by connecting external devices through the RS232 interface
7. Turn off the power after use
Notice
• Balance level before use
• Avoid overloading to prevent damage to the Sensor
• Ambient Temperature should be kept in the range of 0~ 40 ℃
Periodically calibrated to ensure accuracy
• Keep the pan clean to avoid affecting the weighing results
• Power supply voltage needs to match 220V 50Hz requirements
