Overview
CH series Super Thermostat is suitable for bioengineering, food, chemical industry, metallurgy, petroleum and other fields, providing users with High Accuracy, controlled, uniform temperature constant field source, is research institutes, universities, factory laboratories, Quality control departments satisfactory Thermostat.
Features
1. Provide High Accuracy Constant Temperature Field Source.
2. The temperature is uniform and controlled.
3. Applicable to a variety of scientific research and industrial fields.
Principle
Through the built-in heating and temperature control system, the medium (such as liquid) in the Tank is heated and maintained at a set constant temperature, and at the same time, the medium flow is promoted by a circulating pump (flow rate 15L) to ensure a high degree of uniformity of temperature in the tank, thus providing users with a stable thermostatic environment.
Applications
Bioengineering, Food, Chemical, Metallurgy, Petroleum, Research Institute, Colleges and Universities, Factory Laboratory, Quality control department
Steps
1. Place the equipment on a stable bench.
2. Add an appropriate amount of suitable medium to the Tank.
3. Connect the power supply and turn on the power switch of the device.
4. Set the required temperature through the control panel.
5. Start the heating and circulation pump function.
6. After the temperature reaches the set value and stabilizes, it can be used.
7. After use, turn off the heating function and turn off the power when the temperature decreases.
Notice
• Before use, make sure that the equipment is well grounded and placed in a ventilated and stable environment.
When adding media to the Tank, do not exceed the maximum capacity and ensure that the media is suitable for the operation temperature range.
• When the equipment is running, do not touch the inside of the Tank and high-temperature parts to prevent burns.
• It is forbidden to move or tilt the device while it is working.
• Before cleaning the equipment, be sure to disconnect the power supply and wait for the equipment to completely chill down.
• Non-professionals should not disassemble or repair the equipment without authorization.
• Please check the equipment status regularly to ensure its normal operation.
