Overview
MOT500 online carbon monoxide detector, suitable for carbon monoxide concentration detection in various environments. The instrument adopts imported electrochemistry /NDIR infrared absorption gas Sensor and microcontroller technology, with fast Response speed, high measurement accuracy, stability and good repeability, etc. The performance of the whole machine ranks the domestic professional level.
Features
1. Imported electrochemistry /NDIR infrared carbon monoxide gas Sensor, measurement range 0~ 5000ppm, resolution 1ppm.
Response Time ≤ 20 seconds (T90), detection accuracy ≤ +/- 1% (depending on the specific Sensor), linear error ≤ +/- 1%.
3. Support gas expansion, optional 1-6 Sensors.
4. With explosion-proof certification (CNEx16.0547) and Protection Rating IP65.
5. Flexible detection methods are available, including diffusion, circulation, and pump suction.
6. Various installation methods are available, including Wall-Mounted, Pipeline, and Circulation.
7. Rich signal output interface, including 4-20mA, RS485, voltage signal, switch, etc.
8. Supports a variety of data transmission methods, such as cable, TCP/IP, GPRS, and wireless transmission.
9. Comprehensive alarm mode, support on-site sound and light alarm, remote controller alarm, mobile app notification, etc.
10. The alarm setting is flexible, and various modes such as regular high and low alarms and interval control can be set.
11. The shell adopts die-casting aluminum + sand blasting oxidation/fluorocarbon paint, which is explosion-proof and corrosion-proof.
Principle
The detector uses NDIR infrared absorption method or electrochemistry principle to detect carbon monoxide concentration. The Sensor converts the gas concentration signal into an electrical signal, which is processed by the microcontroller, and finally transmits the concentration data and alarm information to the receiving device through various signal output interfaces.
Applications
Suitable for a variety of environments that require online monitoring of carbon monoxide concentration
Standards
GB3836.1-2010 "Explosive environments - Part 1: Equipment - General requirements", GB3836.2-2010 "Explosive environments - Part 2: Equipment protected by flameproof enclosures" d "
Steps
1. Choose the appropriate detection method (diffusion type, flow type or pump suction type) and installation method (Wall-Mounted, pipeline type or flow type) according to the site environment for installation.
2. Connect Power Supply (24VDC, range 12~ 30VDC).
3. Connect the signal output line (such as 4-20mA, RS485, etc.) to the corresponding receiving equipment (such as computer, PLC, DCS, etc.) according to the needs.
4. For remote transmission, choose and connect the corresponding transmission module (e.g. TCP/IP, GPRS, wireless module).
5. Connect the external alarm (if necessary).
6. After power on, the instrument enters the working state, and real-time data can be viewed and alarm parameters can be set through the receiving device.
