$ 791.00Ex works
Equipped with 2.4-inch high definition color screen, supports up to 6 Sensor expansions, Response Time ≤ 20 seconds, with a variety of signal output and protection functions, suitable for harsh industrial environments.
Category : Gas Detector
Brand : KORNO
SKU : NB016116
Service :The delivery and service By NBCLab.Com
MOT500-NOX-Y is an online intelligent nitrogen oxide detector produced by KORNO brand. It adopts large-scale integrated circuit technology and international standard intelligent design, and has high Stability, communication and self-diagnosis functions. The instrument is compatible with various control alarms, PLC, DCS and other Control systems, supports remote detection, control, alarm, and has computer Data storage and analysis functions. It is widely used in petroleum, chemical, metallurgical and other industries.
1. Using 32-bit microprocessor and 24-bit ADC data collection chip to achieve ultra-low power consumption and High Accuracy processing. 2. Equipped with 2.4 inch IPS industrial high definition color screen, the resolution is 320x240. 3. Support 1-6 Sensor extensions, all-in-one composite gas does not support 4-20mA output. 4. PPM and mg/m3 concentration units can be freely switched. Standard multiple signal output modes: 4-20mA output (transmission distance 1Km), RS485 output (using MODBUS RTU protocol, transmission distance 1.2Km), relay output (2 groups of passive output). 6. Support a variety of Signal transmission methods: 3~ 5 core cable, network cable, 433MHz wireless transmission, GPRS wireless transmission. 7. Sensor with 6 target point Adjustment to ensure measurement accuracy and linearity. 8. With manual zero and target point calibrating, factory reset and analog output Adjustment. 9. Wide voltage input, short circuit protection, reverse connection protection, anti-static interference, anti-magnetic field interference and other functions, and with automatic recovery function. 10. Compatible with PLC, DCS, control alarm and other remote control equipment. 11. Shell hard oxidation, explosion-proof and anti-corrosion, adapt to harsh environment. 12. Optional Temperature & Moisture Sensor, on-site sound and light alarm and other accessories.
The detector adopts LSI technology and digital and analog mixed communication technology design. Sensor detects gas concentration and converts the data into electrical signal output. It supports a variety of Sampling methods (diffusion, flow, pump) and signal transmission modes to realize remote monitoring and control.
Petroleum, chemical industry, metallurgy, refining, gas transmission and distribution, biochemical
GB3836.1-2010、GB3836.2-2010
1. Install the instrument, choose Wall-Mounted, Pipeline or Flow Installation method. 2. Connect the power supply (24VDC) and the signal output cable. 3. Select the Sampling method as needed: diffusion type, flow type or pump type. 4. Sensor calibrating, including manual zero and target point calibrating. 5. Set concentration units (PPM or mg/m3) and alarm parameters. 6. Start the instrument and monitor the data through the screen or remote device. 7. Regular maintenance and calibrating to ensure the normal operation of the instrument.
• Power supply voltage in the range of 12~ 30VDC to avoid overvoltage or reverse connection. • Protection Rating IP65 during installation to prevent water and dust from entering. • In all-in-one composite gas mode, 4-20mA output is not supported. • Regularly check Sensor drift, zero drift does not exceed +/- 1% (F. S/year). • Avoid use outside the range of extreme temperatures (-30 to 50 ° C) and Humidity (0 to 95% RH without condensation). • Use explosion-proof enclosures to ensure safety in hazardous environments. • Follow the Operation Manual when calibrating and maintaining to prevent man-made damage. • Signal transmission distance is limited, need to add a repeater to extend RS485 transmission.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
