Overview
The IWAVE WG60 glossmeter is a precision gloss measurement instrument with a projection angle of 60 degrees. The instrument provides automatic measurement, manual measurement, single measurement, average measurement and other Measurement modes, and can realize cross-setting, providing users with flexible and diverse measurement combinations.
Features
1. Exquisite and lightweight appearance makes it extremely convenient to carry and use
2. Automatic calibration, no need for manual adjustment, High Stability, immediate measurement
3. Fully intelligent design, single-button operation, one-handed can achieve all operations, easy to use
4. Long life Illuminant, no need to replace
5. LCD digital display, the display is clear and clear at a glance
6. Built-in large-capacity Keng battery, can be charged repeatedly, fully charged can be continuously measured for more than 12 hours
7. Rich in functions, accurate measurement, Repeatability is good, and the cost performance is quite high
Principle
According to the principle of ray of light reflection, the instrument projects rays of light to the measured surface at a 60-degree angle and receives the reflected light. By measuring the intensity of the reflected light and comparing it with the reflected light intensity of the standard plate, the Glossiness value (GU) of the measured surface is obtained.
Applications
Surface gloss measurement of paints, inks, plastics, ceramics, Stone, metal, paper, wood, etc
Standards
ISO-2813、ASTM-C584、ASTM-D523、DIN-67530、ASTM-D2457、JND-P60、GB-9754、GB-9966、GB-8807
Steps
1. Turn it on.
2, the instrument measurement port vertically close to the surface of the sample.
3. Press the measurement button for measurement.
4. Read the Glossiness value on the LCD display.
5. Measurement modes such as automatic, manual, single or average can be selected as needed.
Notice
• Make sure the instrument is calibrated before measurement.
• When measuring, the instrument measurement port should be vertically and tightly attached to the measured surface to avoid light leakage.
Calibration plates are kept clean to avoid scratches.
• When the instrument is not in use, please store it properly in the Encasement box.
• Please use the matching Power Adapter to charge.
