Overview
MXF-E550 is a MUXUAN brand low-speed powerful laboratory and pilot electric Stirrer, mainly used for paints, coatings, pigments, plastics, food and other liquid Stock production pre-experiment, to provide correct data for large-scale production, can also be used for small batch production, Processing capacity is 0.3-5 L.
Features
1. High-performance motor, low noise, smooth operation, ensuring high-quality machine
2. CPU digital display Dynamic Rotation speed control, support timing fixed speed operation, intelligent control
3. Manual lifting method, light and convenient, low failure rate
4. High dispersion efficiency, maximum Rotation speed 130rpm, can quickly and evenly disperse materials
5. Easy to operate and safe, the dispersion disc is fixed with hexagon bolts, easy to disassemble, replace and clean
Principle
The high-speed operation of the dispersion disc causes the material to form an annular flow, generating strong vortices and spiraling down to the bottom of the eddy current, generating strong shear impact and friction between the particles, and realizing the functions of rapid dispersion, dissolving, uniform mixing and stirring.
Applications
Dispersion and mixing of materials for biological, food, paint, inks, Adhesive, dyestuff, pesticide and other industries
Steps
1. Put the material into the sealing bucket
2. Use manual lifting device to adjust dispersion disc position
3. Rotation speed and timing parameters are set through the CPU digital display control panel
4. Start the device for decentralized operation
5. Turn off the equipment after the operation is completed, remove the dispersion disc for cleaning
Notice
• Material viscosity should not exceed 25000 cps
• Processing capacity is controlled within 0.3-5 L range
• Pay attention to safety during operation and avoid contact with moving parts
• Regularly check whether the dispersion disc fixing bolt is loose
• Make sure the power is disconnected when cleaning the equipment
