Overview
H01-1B digital thermostatic Magnetic Stirrer is a digital thermostatic product, driven by a brushless DC motor, with strong Stir force and digital display of Stir speed, which is suitable for thermostatic Stir occasions in various fields.
Features
1. Driven by brushless DC motor, Stirring force is strong.
2. Stir speed digital display, intuitive and clear.
3, with thermostatic control function, high temperature control accuracy.
4. The heating power can be adjusted steplessly to meet different needs.
5. Compact structure, continuous operation mode.
Principle
The device drives the built-in magnet swirl/spin through a brushless DC motor to generate a swirl/spin magnetic field, which drives the Stir sub placed in the container to synchronize the swirl/spin, so as to realize the Stir of the liquid. At the same time, the device has a built-in heating device and a temperature transducer, which controls the heating power through the temperature setting and feedback system to achieve accurate thermostatic control of the liquid temperature in the container.
Applications
Stirring thermostatic occasions in various fields
Steps
1. Connect the temperature transducer to the terminal behind the machine.
2. Put the beaker with the liquid medicine in the middle of the workbench, put an appropriate Stir in the beaker, and insert the temperature transducer into the liquid medicine. Before plugging in the power plug, adjust the speed and pressure knobs counterclockwise to a minimum.
3. Plug in the power supply, turn on the power switch, and adjust the speed control knob clockwise to start the Stir work. The right display window displays the Stir speed.
4. When the liquid needs to be heated, first turn the button switch of the temperature setting up (set position), adjust the temperature setting knob, and then turn the button switch down (measurement position) when the number in the left display window reaches the required temperature value. The left display window displays the temperature value measured by the Sensor. At this time, the heating indicator light is on, and the heater starts to heat up. When the temperature difference between the temperature in the beaker and the set temperature is > 15 ° C, the heater heats at full power; when the temperature and the set temperature are < 15 ° C, the heater heating power can be adjusted steplessly from 20-400W by the pressure adjustment knob.
5. If heating and temperature measurement are not required, do not connect the Sensor or switch the button up; if heating is not required but temperature measurement is required, the temperature can be set below room temperature.
6, Stirrer after use, should unplug the power supply, to be chilled down after cleaning the appearance, safe storage.
Notice
1. The power socket should be well grounded.
2. When using, the beaker should not be too full to prevent overflow when stirring.
