Overview
TP111 pH analyzer is a common water pH analyzer produced by TIMEPOWER. It has the characteristics of Chinese and English menu operation, full intelligence, multi-function, high measurement performance and strong environmental adaptability. It can accurately measure the pH value and temperature of the solution.
Features
1. Electrode with corrosion resistance, wide measurement range and high accuracy.
2. LCD display, Chinese and English menus, can be quickly switched, easy to operate.
3. High Accuracy Triple Composite Electrode, accurate and convenient measurement.
4. With manual and automatic temperature compensation function.
5. Adopt professional microcontroller technology, high performance, low power consumption.
6. The main board adopts patch technology and high integration isolation circuit design, good anti-interference performance, stable and durable.
7. Standard output signal types are optional, and two sets of relays control switch alarms can be set arbitrarily.
8. With storage function, users can set storage measurement data as needed, which is convenient for inquiry.
9. Linear dispersion history can be displayed, and the pH change of water quality is convenient for inquiry.
Principle
The instrument senses the hydrogen ion concentration of the tested solution through High Accuracy Triple Composite Electrode and converts it into an electrical signal. The built-in professional microcontroller processes the signal, and combines the measurement value of the temperature transducer (Pt1000) for manual or automatic temperature compensation, and finally displays the pH value and temperature of the solution accurately on the LCD screen.
Applications
General water quality monitoring
Standards
Protection Rating IP65
Steps
1. Install the instrument and connect Electrode to the power supply.
2. After booting, set parameters (such as output signal type, alarm value, etc.) through the Chinese and English menus.
3. Immerse Electrode in the solution to be tested.
4. The instrument automatically or manually performs temperature compensation and measurement, and the results are displayed on the LCD screen.
5. Historical data and Linear dispersion can be queried through the menu.
Notice
• The water sample pressure should be less than 0.6 MPa.
• The water sample temperature should be within the range of 5 to 60 ° C.
• Ambient Temperature should be in the range of 5~ 45 ℃.
• Environment allowable relative humidity should be ≤ 90% RH (no condensation).
• Power supply is AC (85~ 265) V, frequency (45~ 65) HZ.
• The installation opening size is 138 * 138mm.
