Overview
The "DECO-PBM-AD-16L" omni-directional planetary Ball mill is a laboratory powder sampling equipment that can make materials achieve ultra-effective three-dimensional full grinding, and can also be used for sample crushing, mixing and homogenization processes. It combines the characteristics of vertical and horizontal planetary Ball mills. Through the 360 ° rolling form of the planetary disc and ball mill tank as a whole, it can form a better crushing effect on the sample, and at the same time greatly improve the uniformity of discharge, improve efficiency and discharge effect.
Features
1. The grinding volume specification is 4 * 15L, strong, fast and comprehensive grinding, which can achieve High Accuracy and highly consistent discharge effect.
2. Fine grinding, no pollution, a wide range of materials suitable for grinding.
3. Rotation speed, time and other ground data control can ensure the sample ground Repeatability and conformity.
4. It can control the rolling speed of the planetary disk and improve the effect of grinding.
5. Configure a variety of ball milling tanks of different materials to grind at the same time to improve the diversity of grinding samples.
6. Support dry grinding, wet grinding, vacuum/pressurized grinding, inert gas grinding a variety of grinding methods.
7. The grinding room and control room are equipped with highly ventilated heat dissipation.
8. Control system can be controlled, easy to set parameters, diverse functions, intuitive digital display, simple operation, one-piece operation and safe use.
9. Power-off protection function, automatic storage of ground data.
10. Standardized production process, exquisite craftsmanship, exquisite material selection, environmentally friendly and energy-saving, with a good service life.
11. Ball mill and ball mill tank are simple to use.
12. Maintenance and overhaul are simple and convenient.
Principle
In the planetary ball mill, the four ball mill tanks placed on the planetary disk also perform reverse high-speed swirl/spin under the high-speed swirl/spin of the planetary disk. At the same time, the planetary disk and the ball mill tank as a whole are rolled 360 ° under the power of the motor. In this process of continuous change of orientation, more intense and uniform friction and impact energy are generated between the material and the ground ball, so that the material in the ball mill tank can be fully crushed, mixed and homogenized.
Applications
Pharmaceuticals, Food, Chemicals, Synthetic Materials, Electronics, Engineering, Metallurgy, Glass, Ceramics, Biology, etc
Steps
1. Set ground parameters, including Rotation speed, time, etc.
2. Select the ground mode, such as running, pausing, reverse running, alternating positive and negative running, intermittent running, adjustable speed tumbling, adjustable speed swirl/spin.
3. Start the device to grind.
4. Monitor the grinding process to ensure safe operation.
5. After finishing the grinding, remove the sample and clean it up.
Notice
• Maximum feed size: Soil material ≤ 10mm, Miscellaneous material ≤ 3mm.
• The minimum discharge particle size is 0.1μm.
Processing capacity is 16L.
• Number of stations is 4.
• Rotation speed of milling tank is 510rpm.
• Power supply voltage is 380V, Frequency 50Hz, power connector is single phase.
• Net weight 600kg, Dimension 1620 * 1000 * 1200mm.
• Protection Rating is IP53.
• Make sure the equipment is well grounded before use to avoid the risk of electric shock.
• Regularly check equipment components to ensure normal operation.
• Avoid overloading during grinding to prevent equipment damage.
• Disconnect the power supply during maintenance to ensure safety.
