Overview
YUE FENG FSP6633 flame spectrophotometer adopts concave Holographic grating design, with five elements can be selected in any combination and direct reading measurement function. The instrument adopts imported Photocell, photovoltaic cell to receive element signals, and is equipped with a 5.6-inch color Touchscreen. It supports automatic ignition and flame monitoring to ensure safe and reliable operation.
Features
1. Concave Holographic grating design, Light spectrum pure, accurate, narrow passband, High Sensitivity, better linearity
2. Five elements can be selected in any combination while direct reading measurement, only software selection, flexible and convenient
3. Similar to atomic absorption design, magnificent, small and delicate
4. Imported Photocells, photovoltaic cells receive element signals, stable and reliable performance
5. With an internal standard channel, it is corrected with signals that do not contain measurement elements, and the measurement is synchronized with the elements. The internal standard correction is designed to be optional
6. Adopt 5.6-inch color 640 × 480 display screen and supporting Touchscreen, interface graphics, measurement flow
7. Adopt automatic ignition, including flame monitoring, with flameout protection and alarm functions
8. Switching power supply, light weight, small size, low heat generation, small impact of external power supply, energy saving and environmental protection
Principle
The instrument uses 1200 concave Holographic grating for spectroscopic measurement and Linear dispersion calibration by Linear dispersion fitting method. Imported Photocells, photovoltaic cells receive element signals during measurement, and internal standard channels can be used for synchronous measurement correction.
Applications
Elemental analysis, chemical testing, laboratory measurement
Standards
Stability standard: the relative maximum change of instrument indication within 15S is less than or equal to 2%
Steps
1. Select the combination of elements to be measured through the software
2. The instrument automatically ignites and starts flame monitoring
3. Sample measurement, instrument display measurement data synchronously
4. The printer can be connected to output data through the USB port
Notice
• Ambient Temperature should be kept within the range of 10~ 35 ℃
• Make sure the flame monitoring function is normal before use
• Pay attention to whether the flameout protection function is effective
• Regularly Check Instrument Stability
