Overview
H01-1D digital thermostatic Magnetic Stirrer is a multi-station, digital thermostatic product, with digital temperature automatic control, Heating power adjustable and other functions. It adopts brushless DC motor drive, strong stirring force, each station can operate independently.
Features
1. Multi-station design, each station can be operated independently.
2. Driven by brushless DC motor, strong stirring force.
3. With digital display temperature automatic control function.
4. Heating power adjustable.
Principle
The device drives the stirrer to swirl/spin in the container through magnetic coupling to realize the stirring function. At the same time, through heater heating and temperature sensor feedback, with the digital temperature control system, the temperature of the liquid medicine is automatically controlled and thermostatic maintained.
Applications
Laboratory agitation, chemical synthesis, sample prepative, teaching experiment
Steps
1. Preparation before use: turn off the main power switch, turn the speed control knob of each station counterclockwise to OFF, dial the setting/measurement switch to the setting positioning, connect the temperature sensor, and place it smoothly.
2. Place the sample: Place the beaker containing the liquid medicine and stirrer in the middle of the table and insert the temperature sensor Probe. Turn on the power supply and turn on the main switch.
3. Start stirring and setting temperature: swirl/spin the speed knob clockwise to ON and adjust to the desired Rotation speed. Adjust the temperature setting knob to the desired temperature value, then turn the setting/measurement switch to the measurement position, and the device starts heating.
4. Adjust Heating power: During the heating process, the Heating power can be finely adjusted through the pressure regulation knob (20-350W continuously adjustable) according to the temperature difference and actual needs to achieve smooth thermostatic.
5. Temperature measurement operation only: If no heating is required, only the temperature is measured, the temperature setting value is adjusted to be lower than room temperature, and the switch is placed in the measurement position.
6. After use: unplug the power supply, clean the appearance and keep it properly after the equipment is chilled down.
Notice
• Power sockets should be well grounded.
• The beaker should not be too full when using to prevent overflow when stirring.
