Overview
YIHENG Vacuum oven is suitable for heat treatment in vacuum state such as defoaming, dehydrating, hardening and drying after washing in the production process of electronic products, and is widely used in vacuum drying treatment of lithium-ion batteries, LED photoelectric components, crystal oscillators and other electronic product production processes.
Features
1. The studio is made of stainless steel plate to ensure that the product is durable and easy to clean.
2. The rectangular vacuum chamber makes the effective volume utilization rate high and can make full use of space.
3. Resilience Double-decked Tempered Glass Door Observation of indoor objects at a glance.
4. The box door is closed and elastic and adjustable, and the integrally formed synthetic silicone rubber door sealing ring ensures a high degree of vacuum in the box.
5. Add an over-temperature protection temperature control port to effectively prevent safety problems such as temperature runaway. (optional)
6. Each layer of the box can be independently heated, independently vacuumed, and independently injected with nitrogen without interfering with each other. (Multi-box series)
7. Low noise imported Vacuumpump, stable and reliable vacuum control. (With "B" for imported Vacuumpump)
8. Program control operation, heating, vacuum holding and nitrogen holding time can be set according to process requirements to ensure the stoving conformity of each batch and reduce the stoving difference of the product as much as possible. (optional)
Principle
The equipment extracts the air in the working room through the Vacuumpump to form a vacuum environment, and combines the heating system to dry the material. In the vacuum state, the boiling point of water is reduced, which is conducive to the rapid evaporation and removal of moisture in the material, thereby improving the drying efficiency and reducing the damage to heat-sensitive materials.
Applications
Vacuum drying treatment for the production process of lithium-ion batteries, LED photoelectric components, crystal oscillators and other electronic products
Steps
1. Put the materials to be processed into the studio.
2. Close the box door and adjust the closing tightness.
3. Set the heating temperature, vacuum holding, and nitrogen holding time according to the process requirements (e.g. with program control function).
4. Start the equipment, vacuum and heat drying.
5. After drying is completed, end the process according to the program or manual operation, and take out the material.
Notice
• Optional exhaust oil filtrating device, it is recommended to replace it every 6 months.
• Model with "B" is equipped with imported Vacuumpump.
• BPZ series Vacuum oven with Vacuumpump and drying tank.
• Some models (e.g. BPZ-6503B, BPZ - 6090-2/2 B, BPZ - 6210-2/2 B) have a delivery period of 25 days.
• Some models (e.g. BPZ-6933B, BPZ - 6140-3/3 B) have a delivery period of 30 days.
The recommended working environment temperature is RT + 5~ 40 ℃, and the humidity is below 50% RH.
