Overview
SHENGLI SLX1700-20 high temperature furnace is a box furnace with silicon molybdenum rod as heating element, double-decked shell structure and 40-stage programmed temperature control system. The furnace is made of aluminum oxide polycrystalline fiber material, which has the advantages of Balanced temperature field, low surface temperature, fast temperature rise and fall, energy saving, etc. It is an ideal product for powder, Pottery and porcelain sintering, high temperature experiments, and mass testing in universities, scientific research institutes, and industrial and mining enterprises. This series of heaters are developed with international professional technology and have high comprehensive performance indicators.
Features
1. Use 1800 silicon molybdenum rods as heating elements.
2. Adopt double-decked shell structure to effectively reduce the surface temperature to room temperature.
3. Equipped with a 40-stage intelligent program temperature control system to achieve automatic control of the entire process.
4. The furnace is made of aluminum oxide polycrystalline fiber material, which has a Balanced temperature field and a fast heating rate.
5. It has the advantages of energy saving, low surface temperature and uniform temperature distribution in the inner cavity.
Principle
The furnace uses phase-shifted triggering and SCR control technology, and the heating process is precisely controlled by a 40-segment intelligent program controller. The double-decked shell structure and energy-saving Pottery and porcelain fiber furnace materials help to achieve a uniform temperature field and rapid temperature rise and fall.
Applications
Powder sintering, Pottery and porcelain sintering, high temperature experiment, mass testing in universities, scientific research institutes, industrial and mining enterprises
Steps
Connect the power supply (220V, 50Hz).
2. Set the required temperature program through the 40-segment intelligent program controller.
3. Start the equipment and the system will automatically control the heating process.
4. After the experiment or sintering is completed, the temperature is controlled or naturally chilled down according to the program.
5. Turn off the power.
Notice
• Power supply voltage is 220V, 50Hz.
• Be familiar with the use of the 40-segment program controller before operation.
• The surface temperature may decrease when the equipment is running, but the inside of the furnace is high temperature, please pay attention to safety.
• Do not exceed the maximum temperature 1700 ℃ and Temperature range 1600 ℃.
• The lifting temperature rate is recommended not to exceed 20 ° C/min.
• Please turn off the power properly after use.
