Overview
This SHENGLI SLX1700-40 high temperature furnace is a box furnace. It uses 1800 type silicon molybdenum rod as the heating element, adopts double-decked shell structure and 40-segment programmed temperature control system, phase shift trigger, thyristor control. The furnace adopts aluminum oxide polycrystalline fiber material, which has the advantages of Balanced temperature field, low surface temperature, fast temperature rise and fall, and energy saving. This series of box furnaces adopts international professional technology and is self-developed. It is a new type of heater with high performance and high energy saving. The comprehensive performance index is high and it is at the domestic superior level.
Features
1. Using 1800 type silicon molybdenum rod heating element to ensure efficient heating; 2. Double-decked shell structure to reduce the surface temperature to room temperature; 3.40 intelligent program temperature control system to achieve automatic control of the whole process; 4. Phase shift trigger, thyristor control, improve temperature control accuracy; 5. Furnace with aluminum oxide polycrystalline fiber material, temperature field Balance, energy saving; 6. Fast temperature rate, low surface temperature; 7. Comprehensive performance index is high, in the domestic superior level.
Principle
The high temperature furnace generates heat through 1800 type silicon molybdenum rods as heating elements, and uses phase shift trigger and thyristor control technology to adjust Power. The 40-segment intelligent program temperature control system automatically controls temperature changes to ensure uniform temperature distribution in the furnace. Double-decked shell structure and aluminum oxide polycrystalline fiber furnace material effectively insulate, reduce surface temperature, achieve rapid heating and energy-saving operation.
Applications
Universities, research institutes, industrial and mining enterprises do powder, ceramic sintering, high temperature experiments, mass testing
Steps
1. Connect the power supply to ensure that the voltage is 380V 50Hz; 2. Set the 40-stage program temperature control system and enter the required temperature parameters; 3. Start the heating and monitor the heating process; 4. After reaching the set temperature, carry out the experiment or sintering operation; 5. After completion, cool down according to the program or chill down naturally; 6. Turn off the power supply and clean the furnace.
Notice
- Check whether the Power supply voltage meets the requirements of 380V 50Hz before use; - Avoid touching the high temperature furnace body during operation to prevent burns; - Ensure that there are no flammable and explosive items in the furnace; - Maintain the heating elements and temperature control system regularly; - Follow Program settings to prevent temperature overrun; - Avoid rapid cooling down during cooling to avoid damage to furnace materials.
