Overview
SHENGLI SLG1400-100 tube furnace is a high temperature equipment with 99 high purity aluminum oxide corundum furnace tube and silicon carbide rod heating element. It is equipped with double shell structure, 51-stage programmed temperature control system and double shell cold air system, with temperature control accuracy of +/- 1 ° C and maximum temperature of 1400 ° C. It is suitable for universities, research institutes and industrial and mining enterprises.
Features
1. Adopt 99 high purity aluminum oxide corundum furnace tube to ensure high temperature performance.
2. The heating element is silicon carbide rod, providing efficient heating.
3. Double Shell Structure Enhances Equipment Stability and Safety.
4.51-Stage programmed temperature control system for accurate temperature control.
5. The double shell is equipped with a cold air system for rapid cooling.
6. Both ends are sealed with stainless steel flanges to ensure atmosphere sealing.
7. Temperature control accuracy +/- 1 ° C, maximum temperature 1400 ° C.
8. Can pass through a variety of atmospheres, such as oxygen, nitrogen, argon, and water vapor.
Principle
The tubular furnace is heated by a silicon carbide heating element, and a High Accuracy SCR Phase Shift Trigger Control system is used to achieve temperature regulation. The double shell structure and the cold air system work together to ensure rapid heating and cooling, while the stainless steel flange sealing maintains the atmosphere environment in the furnace.
Applications
Universities, research institutes, industrial and mining enterprises
Steps
1. Connect the power supply and ensure that the voltage is 220V.
2. Set up the programmed temperature control system and adjust the heating rate and temperature as required.
3. Start heating and monitor temperature changes.
4. After use, quickly cool down through the cold air system.
5. Turn off the power and perform equipment cleaning and maintenance.
Notice
- Power supply voltage is checked to 220V before operation.
- Ensure that the furnace tube and sealing components are in good condition to avoid atmosphere leakage.
The heating rate is controlled within the range of 1-20 ° C/min.
- Cool down immediately after use to prevent equipment from overheating and damage.
- Regular maintenance of heating elements and Control system to ensure stable performance.
