Overview
The YIHENG SX2 - 2.5-10 TP muffle furnace is a programmable box type resistance furnace with a design temperature of 1000 ° C and a volume of 2L. The product uses a Pottery and porcelain fiber furnace and wirecoil for heater heating elements, which are precisely controlled by a microcomputer PID controller.
Features
1. Adopt multi-stage programmable controller, support 30-stage program, each stage can be set to heat up or stay, realize programmed temperature, time, Heating power cycle, automatic control operation.
2. Furnace liner and box panel are made of stainless steel, which has the advantages of corrosion resistance, not easy to rust, and no deformation at high temperature.
3. The unique design of the furnace door makes it safe and simple to open the door, and it can effectively prevent the leakage of high-temperature hot air in the furnace.
4, good door sealing design, small heat loss, help to improve the uniformity of temperature in the furnace.
5. Equipped with multiple safety protection functions, including automatic power failure, overcurrent, overvoltage, and overheating when the furnace door is opened.
6. Pottery and porcelain fiberboard can be used as thermal insulation materials, with good thermal insulation effect and low surface temperature of the box shell.
Principle
Pottery and porcelain fibre furnaces are precisely heated by the wirecoil for heater via a microcomputer PID controller. Linear dispersion is achieved. Its multi-stage programming function allows users to preset complex heating, holding and cooling programs to automate the heat treatment process.
Applications
Industrial and mining enterprises, scientific research institutions, chemistry, metal processing industry, Pottery and porcelain industry
Steps
1. Turn on the power supply and turn on the power switch of the device.
2. Set the required temperature program (up to 30 segments) through the microcomputer PID controller.
3. After confirming that the program is correct, start the heating process.
4. The equipment will operate automatically according to the preset program, including the heating and holding stages.
5. After the program is completed, the device can automatically stop heating or enter standby mode.
6. After the temperature in the furnace has dropped to a safe range, the sample can be removed by opening the furnace door.
Notice
When opening the furnace door, please note that the safety switch of the furnace door will automatically cut off the heating power supply, but you still need to pay attention to high temperature burns.
• During the operation of the equipment, do not open the furnace door for a long time, so as not to affect the uniformity of the furnace temperature and cause a large amount of heat loss.
Make sure the equipment is well grounded and check the safety of the electrical wiring regularly.
When placing or removing samples, use special tools to avoid direct hand contact with high-temperature areas.
• Do not place flammable and explosive items around the equipment and keep it well ventilated.
Do not operate beyond the maximum design temperature of the equipment (1000 ° C).
When the device is not in use, please disconnect the power supply.
